Stoney871 Posted April 21, 2014 Share Posted April 21, 2014 The full kit will not come with removal keys. TBH the Ford cable is expensive for what it does and is prone to bad contact alignment. You're better off with a cable that has a 3.5 plug on the end, you can run it to wherever you choose, no holes to drill and more efficient (plus you get the correct keys with it).- http://pages.ebay.com/link/?nav=item.view&id=360898168857 No need to disconnect the radio quadlock at all, just pull the radio forward and plug the cable into the spare socket. Quote Link to comment Share on other sites More sharing options...
Steven2898 Posted April 28, 2014 Share Posted April 28, 2014 ok so i ordered that lead you said would be easier and it arrived today just wondering do you recommend anywhere to put it for convience and how do i get it back out after i put the radio back in where does it come out of? Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 28, 2014 Share Posted April 28, 2014 I used to have my cable coming out from under the demister switch panel so it was central and accessible. Since fitting an upgraded centre console I extended the cable to come out in the armrest storage tray. Some have brought the cable out of one of the centre air vents and some bring the cable out inside the glovebox. The easiest way to ensure you can pull the cable out to full length is to tape some string (strong patacord is best) to the cable so you can guide it through from wherever you choise to position it. Sent from my SM-G900F Quote Link to comment Share on other sites More sharing options...
Steven2898 Posted April 28, 2014 Share Posted April 28, 2014 Yea i like the plan off making it come out, just below the demister button but how did u get the lead down there? Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 29, 2014 Share Posted April 29, 2014 If you remove the radio fascia you will see the two screws holding the switch panel in place. Just loosen the screws and slide the cable down behind. Quote Link to comment Share on other sites More sharing options...
Steven2898 Posted April 29, 2014 Share Posted April 29, 2014 I have been at this stupid radio all day i got one side of it out the side closest to the wheel. i think the clips are broke on the left side as it is not budging i am using the right removal tools and they just wont clip when i put them in, they just slide in and out like theres nothing for them to clip to, any other ideas how i could get this radio out? I have had it out before with the same removal tools it just wont budge now been at it all day Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted April 29, 2014 Share Posted April 29, 2014 Steak knives instead of the keys or push firmly on the side of the radio that is stuck to release pressure on the claws as you insert the keys. Quote Link to comment Share on other sites More sharing options...
banditopagito Posted February 5, 2018 Share Posted February 5, 2018 Sorry to bring up a very old thread! I have removed the head unit to fit the following cable https://www.ebay.com/itm/360898168857?rmvSB=true Only to find that all the ports in the quad lock adaptor are full, does this mean I already have an AUX cable fitted and just need to dig a bit further in the back of the glovebox? Any help would be much appreciated but if this thread is dead and buried then fair enough! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.