Lenny Posted September 5, 2016 Author Share Posted September 5, 2016 38 minutes ago, calllumallan said: Hello. Don't suppose you would have an updated link to this for a mk2.5 focus? I've been having a look around but my google skills aren't the greatest. Thanks! Hi Link here: http://www.ebay.ie/itm/281377090054 Or if you really like spending Here😥: http://www.autospecialists.co.uk/AS-Performance-Bonnet-Lifter-Kit-Ford-Focus-MK2-Product-1291.html 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted October 21, 2016 Share Posted October 21, 2016 Hi Lenny, i bought these since feb but havent got round to it .may do it tomoro . Will be using your guide Is this an easy mod? Yunii Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 22, 2016 Share Posted October 22, 2016 Hello mate yes it's fairly easy mod just do one at a time and be careful when fitting the locking pins in to the ball ends. Once fitted it's a nice touch when opening the bonnet good luck and let me know how you get on 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted October 23, 2016 Share Posted October 23, 2016 Hello mate yes it's fairly easy mod just do one at a time and be careful when fitting the locking pins in to the ball ends. Once fitted it's a nice touch when opening the bonnet good luck and let me know how you get on How did you go abouts with the bonnet hinge part ? Did u make a mark to its original resting place so bonnet doesnt move out of aligning. How long did it take? Yunii Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 23, 2016 Share Posted October 23, 2016 If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀 Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 23, 2016 Share Posted October 23, 2016 If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀 By the way I put the brackets on top of the hinge bracket and not In between as might be shown on some pictures Darren 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted October 23, 2016 Share Posted October 23, 2016 If you do one hung at a time then you should get away without marking bonnet I can't really remember how long it took the tricky part is working around the plastic trim on the wings and as I said before the small clips that secure the rod ends to the ball on the bracket. Good luck 😀 By the way I put the brackets on top of the hinge bracket and not In between as might be shown on some pictures Darren Any close up pics? I will start it in morning. Yunii Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 23, 2016 Share Posted October 23, 2016 Okay no problem hope these are okay 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted October 23, 2016 Share Posted October 23, 2016 Okay no problem hope these are okay Thanks, that explains heck of a lot by your images. Btw what region you from? Yunii Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 23, 2016 Share Posted October 23, 2016 I live in Warwickshire glad the photos helps you Darren Quote Link to comment Share on other sites More sharing options...
Lenny Posted October 24, 2016 Author Share Posted October 24, 2016 Quote Link to comment Share on other sites More sharing options...
yunii Posted October 24, 2016 Share Posted October 24, 2016 I've seen that on youtube Thanks Lenny Yunii Sent from my SM-G925F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted October 24, 2016 Author Share Posted October 24, 2016 4 hours ago, yunii said: I've seen that on youtube Thanks Lenny There way of fitting the balljoints would be more accurate than mine to be fair 😅 Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted October 25, 2016 Share Posted October 25, 2016 Hi yunii how did you get on with the bonnet struts? Quote Link to comment Share on other sites More sharing options...
yunii Posted November 5, 2016 Share Posted November 5, 2016 Hi yunii how did you get on with the bonnet struts? Done & now admiring the finished job. https://vimeo.com/190384327 Yunii Sent from my SM-G925F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted November 6, 2016 Share Posted November 6, 2016 Looks good did you have any trouble fitting them? Darren 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted November 6, 2016 Share Posted November 6, 2016 Looks good did you have any trouble fitting them? Darren No just sliced my finger trimming the wing plastic covers. Yunii Sent from my SM-G925F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
TangoDaz Posted November 6, 2016 Share Posted November 6, 2016 Me too lol Darren 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.