joeee Posted March 1, 2009 Share Posted March 1, 2009 hi all im new to the site.. ok heres what i need to find out.. iv a mk4 1998 fiesta an it needs a new clutch so i went on eBay an i found a few clutch kits but the bearing seems to be diffrent?? as the one i have has an arm on it?? anyway i was looking on eBay an are the clutchs the same for most fords? like the 1.25 an the 1.3 been the same? its not the ztec its an endura an would these use the same clutch?? Quote Link to comment Share on other sites More sharing options...
Deano_365 Posted March 1, 2009 Share Posted March 1, 2009 The best thing i would do is to go to a local garage or car shops (like halfords) and tell them your make a model and ask what they would recommend. Quote Link to comment Share on other sites More sharing options...
stef123 Posted March 1, 2009 Share Posted March 1, 2009 could the arm you are reffering to be the slave cylinder? Quote Link to comment Share on other sites More sharing options...
joeee Posted March 1, 2009 Author Share Posted March 1, 2009 could the arm you are reffering to be the slave cylinder? yeah mate thats it.. ok did a bit or reading there for the last hour.. would the ztec an the endura use the same clutch plate?? Quote Link to comment Share on other sites More sharing options...
stef123 Posted March 1, 2009 Share Posted March 1, 2009 yeah mate thats it.. ok did a bit or reading there for the last hour.. would the ztec an the endura use the same clutch plate?? i would replace that while you have the gearbox and clutch out. as for the clutch plates, im not sure if they are different for the 2 engines. try emailing some of the sellers and ask them to confirm if it will fit your car if you are unsure. Quote Link to comment Share on other sites More sharing options...
vroom Posted March 2, 2009 Share Posted March 2, 2009 i think the endura is a diesel engine and zectec is petrol the endura will have a higher torx rating so wont suit your zetec Quote Link to comment Share on other sites More sharing options...
gaz6076 Posted March 2, 2009 Share Posted March 2, 2009 i think the endura is a diesel engine and zectec is petrol the endura will have a higher torx rating so wont suit your zetec The 1.3 endura engine is a petrol. I'm sure the endura and zetec engine use the same gearbox to they would use the same clutch. Don't take my word on this though hi all im new to the site..ok heres what i need to find out.. iv a mk4 1998 fiesta an it needs a new clutch so i went on ebay an i found a few clutch kits but the bearing seems to be diffrent?? as the one i have has an arm on it?? anyway i was looking on ebay an are the clutchs the same for most fords? like the 1.25 an the 1.3 been the same? its not the ztec its an endura an would these use the same clutch?? If your talking about the release bearing inside the gearbox, it pops out the arm you mentioned. Quote Link to comment Share on other sites More sharing options...
vroom Posted March 3, 2009 Share Posted March 3, 2009 ok then your problem might be because the zetec g/b is a hydralic g/b and your endura is cable g/b on a cable box the clutch cable runs into cockpit and on to the pedal but the hydralic ztec has no cable on top of its g/b there will be what looks like a bleed nipple and a pipe going into g/b so in theory they cannot be interchanged Quote Link to comment Share on other sites More sharing options...
gaz6076 Posted March 3, 2009 Share Posted March 3, 2009 My mk5 fiesta gearbox has a hydraulic clutch and its the same 1.3 endura engine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.