Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 1 hour ago, Tezza said: Not to burst anyone's bubble but if you are fitting these to a mk2.5 focus 2008-2011 the FoCCus software will not be able to active the mirrors as that program, is for the 2011 onwards focus, You need the elmconfig software http://civil.iffc.ru/ELMConfig/ this will turn on the mirrors and the puddle lamp but will not allow you to enable folding with remote (only via the switch inside) there is only one program and adaptor that will allow you to do this and its called UCDS. I was just about to say my elm327 will not connect to my ecu thanks tezza saves the day thanks By the way anyone in London or close to got UCDS and is willing to do it for me ? Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 26, 2019 Share Posted June 26, 2019 6 minutes ago, Wazzer71 said: I was just about to say my elm327 will not connect to my ecu thanks tezza saves the day thanks By the way anyone in London or close to got UCDS and is willing to do it for me ? Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 7 minutes ago, Tezza said: Got it thanks tezza Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 Seen ucds on eBay from China are they any good and do they work Thanks Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 26, 2019 Share Posted June 26, 2019 26 minutes ago, Wazzer71 said: Seen ucds on eBay from China are they any good and do they work Thanks No mate they will not work its the Russian one you need Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 13 minutes ago, Tezza said: No mate they will not work its the Russian one you need Great many thanks tezza again Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 Keep getting this tezza cnt load the software Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 26, 2019 Share Posted June 26, 2019 Giving up Its easier just to pay some to do it for me lol anyone willing? Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 26, 2019 Share Posted June 26, 2019 42 minutes ago, Wazzer71 said: Giving up Its easier just to pay some to do it for me lol anyone willing? http://civil.iffc.ru/ELMConfig/ELMConfig.zip Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 Tryed it. It works but when I start an obd scan it just keeps on scanning Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 32 minutes ago, Wazzer71 said: Tryed it. It works but when I start an obd scan it just keeps on scanning You might need to download the runtime pack or make sure your on the correct port https://www.jamessimpson.co.uk/host/RuntimePack.zip Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 I added the runtime pack I start an obd scan it just keeps on scanning the same Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 Finally got the mirrors why are they so hard to find . Dam mk3 are cheaper and easier find Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 7 minutes ago, Wazzer71 said: I added the runtime pack I start an obd scan it just keeps on scanning the same What page you reading there ? you only need to go into ddm and pdm Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 That’s were it when on its own I only opened the port Quote Link to comment Share on other sites More sharing options...
Ennvoqation Posted June 27, 2019 Share Posted June 27, 2019 9 minutes ago, Wazzer71 said: Finally got the mirrors why are they so hard to find . Dam mk3 are cheaper and easier find Tell me about it, been looking into it myself. £180 for a new pair on eBay and near impossible to find second hand. Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 Just now, Ennvoqation said: Tell me about it, been looking into it myself. £180 for a new pair on Ebay and near impossible to find second hand. Try looking under just powerfold mirrors and not puddle light like I did 1 Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 9 minutes ago, Wazzer71 said: That’s were it when on its own I only opened the port Did you highlight focus mk2 in the connection tap Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 Yours are easy it’s a mk3 a 2015 Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 No focus come up tezza Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 1 minute ago, Wazzer71 said: No focus come up tezza should come up like this when using the drop down arrow in connection . . Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 26 minutes ago, Tezza said: should come up like this when using the drop down arrow in connection . . This what I get Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 try clicking on FTDI then connection Quote Link to comment Share on other sites More sharing options...
Wazzer71 Posted June 27, 2019 Share Posted June 27, 2019 Tezza your the man ty it’s done Even told it I use Ron 95 fuel great thanks all Quote Link to comment Share on other sites More sharing options...
Tezza Posted June 27, 2019 Share Posted June 27, 2019 Nice one Now while your waiting for the mirrors have a read up on the rear disc conversion Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.