Jump to content
Do Not Sell My Personal Information


Problem removal of Ford 6000 radio


Intersimi
 Share

Recommended Posts

Hi,

I have purchased the removal tools, however they only work on 3 of the slots. The 4th one just wiggles about and I am unable to remove the double din head unit due to this.

Does anyone know how else to remove the unit?

Link to comment
Share on other sites


It is possiable that the fourth pin does not locate because the clip inside is bent, this has happened to us many times before. You could try using a Non Ford removal key such as a Kenwood key as they have a longer end which should reach further into the radio, once in you basically have to locate the clip and bent it inwards to release the radio.

If you are unable to do this you may need to take it to a specialist radio store who will be able to do this for you.

Link to comment
Share on other sites

Hi, I managed to get a long slim spoon in , which went in to approximately 3x the length of the key. Unfortunately, I was unable to feel anything and tried wiggling from left to right, but to no avail.

Can any of the panels be removed to reveal the catches?

Link to comment
Share on other sites

As far as i know you cant get to the pins any other way, it might be that whilst you have the 'spoon' in there you can also put a panel tool down the side of the unit to help push the unit out, as there is a little bit of play in the panels.

It takes alot of time and effort but thats about all i can think off, sorry :(

Link to comment
Share on other sites

Thanks for the swift reply Jay.

I will give it a try and let the thread know for closure :)

Link to comment
Share on other sites


I managed to get the thing out, and basically is was down to brute force and ignorance. I have managed to correct the issue with it. Basically, there is a small catch on the inside. On my stereo, the catch was bend around and hence the tool was not catching it.

I have attached an image of the catch.

post-4600-1236274963_thumb.jpg

Link to comment
Share on other sites

  • 10 months later...

Thanks for the advice in this discussion. I've been trying to get my damn stereo out for some time but the bottom right catch was giving me hassle. The key would grip onto something but it wasn't the spring. I gave up and went to ½ord's a few days ago and they tried some bigger keys to no avail. After reading this I decided to use the blade on my swiss army knife as it's about 3 inches long and doesn't bend under pressure like the keys, put it in and wiggled it around and the bugger came right out with no problems.

Danke schön

Link to comment
Share on other sites

  • 7 years later...

I am having a similar problem with the top left catch (and probably the top right too) as I will be scrapping the car in a couple of months time, I was thinking that I could drill through the plastic of the dash at the appropriate point an push the catch inwards.  Will this work ?  as I have not seen the the unit (yet) I cannot tell where to drill though !  

I told the local kwik fit fitter to connect an extra battery before he changed mine ( this always works for me) but the clever clogs said he could remove the radio - and of course he couldn't and left me high and dry !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership