Gearbox Mounting.

[Marty1198]

Had an annoying vibration at the front end of my car and a knock when starting up and turning off. Been getting steadily worse as the week went on. So I took to my local mechanic for a look see and after a few preliminary questions he gave me the usual options which included possible clutch problems. Oh dear! However, after putting the car on the ramps and further inspection, he concluded that the most likely problem was a gearbox mounting being goosed. "Fix it then" says me. He did. Now £100 lighter and problem solved. Apparently only Ford make the mounting. Making it that bit more expensive. And an MOT and service is also due at the end of the month too. Expensive month all round!!!!

[FOCA]

They are bad for going, it has to resist the torque reaction and isolate he vibratoin/ noise of the engine

Some fill the "rubber" bit up with tigerseal as a "temporary" measure

Its not hard to do yourself, if you can get the car high enough its just 2 bolts - my mount gas been "gone" a long time and i have the replacement one (bought off eBay for £20) to put on - when i get "round to it" :)

[Marty1198]

I don't have the space or the equipment to do it myself unfortunately. I'm just happy it was only a mounting and not clutch related. This time!!!

[FOCA]

I don't have the space or the equipment to do it myself unfortunately. I'm just happy it was only a mounting and not clutch related. This time!!!

Yes, and you've sorted yours but my new mount is sitting on a shelf in the house and the old one is rattling about on the car (at least i know what the noise is!) the weather is getting better so im running out of excuses to do it