Jump to content
Do Not Sell My Personal Information


Fiesta 2010 Discs And Pads Change


selway89
 Share

Recommended Posts

Just a quick query.

Can anyone confirm for me if a 7mm allen key is required for changing discs and pads on the Fiesta 2010?

I know most Fords do have these but just want to be sure.

Also if anyone knows the recommended torque setting for them that would be great?

Many thanks

James

Link to comment
Share on other sites


James I believe all the mk7 no longer use the 7mm Allen key anymore.

They are the sliding pin type with hex head bolts - which should come with your new pads

Link to comment
Share on other sites

Oh right ok. I will need to check that when they turn up. I have just ordered a discs and pads set from eBay.

If its a star/torx headed bolt then thats fine.

Thanks for the info.

Link to comment
Share on other sites

Jus done the pads on my 2009 1.4 titanium jus needed a 12mm spanner for the 2 bolts.

Link to comment
Share on other sites

Cheers for the info. Sounds like I wont need to by a 7mm allen key.

Will be getting round to doing them shortly.

Link to comment
Share on other sites


Hi guys quick question. Any got the torque settings for the carrier bolts on the front discs?

Haven't been able to get my hands on a Haynes manual and will be doing the discs and pads tomorrow morning come sunshine or snow! :P

Cheers

James

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership