ajt 10 Posted March 20, 2013 Turbo2 shows the missing broken vane, almost dead center. I slipped a piece of card behind broken exhaust vane, to try and show it better. Turbo4 shows how much oild was on the compressor side. Turbo1 shows the variable vane mechanism top side, you can see the hex scres aswell. Share this post Link to post Share on other sites
ajt 10 Posted March 22, 2013 Its' virtualy done, just under 13 hours outside in sleet and howling winds. I feel like brown sticky stuff. Just need to put inder shields back on, then check fluid levels. Have ranm it on idle for 10 minutes that tried to give it a few revs, it hestitated around 3200 for a split second, then shot past it. Hardly any smoke. Good news, oil pan and filter were spotless, no carbon, no swarf. Still replaced turbo oil feed though. Inter cooler was full of slightly sludgy oil. Only sheared one bolt on sump! and only one bolt left over that I can't account for! The best news, my car has been DPF deleted! Noticed the welded cutout on the dpf, and could never force a dpf error. Win some, lose some. I'm off to bed now, I have bever ached all over like this before. Share this post Link to post Share on other sites
salsheikh 605 Posted March 23, 2013 Alan, did you replace the turbo yourself? i used some cellulose thinners to clean out my intercooler and did this a few times until it ran clear. the thinner evaporate quickly so no chance of having any left inside before re-fitting the i/c. good to hear the cars running well again. Share this post Link to post Share on other sites
FOCA 652 Posted March 24, 2013 I wonder if it was remapped as well as having the DPF deleted? Share this post Link to post Share on other sites
