Dmb Ford Gel Badge Overlays?

[PhillBirkett 0]

Just wondering if any one has used the DMB gel badge overlays on the new Mk 7 facelift fiesta, if so any good?

:D

[sambooka 13]

Loads have used them on the pre facelift and they are pretty good sometimes they need a bit extra adhesive on the big badges to stick them for good but all the others brilliant no problems

[Brigante 332]

i think you'll find a fair amount of members have em lol

i've got the carbon chrome ones on my focus

its worth saying as well that they will do custom text if you request it

for example i've de-badged my car, so i got the rear overlay to say focus instead of ford.

so you could always get the front to say ford n the rear to say fiesta, would look a bit different

[b1g_dav3 358]

What's the recommendation on a white car?

DMB are excellent :P

[PhillBirkett 0]

yeah they do look pretty sweet on the pre facelift models, defo think i will get myself some of them, that custom idea is quality!

[Stoney871 8,139]

Another option is this site-

http://domedbadge.co.uk/

You can basically make whatever badge you want.

[b1g_dav3 358]

Another option is this site-

http://domedbadge.co.uk/

You can basically make whatever badge you want.

Pink with yellow 'Ford' writing :o thanks!

[jimrex 50]

Highly recommended, I too have the carbon fibre chrome ones and they look really good on a black car. I did lose the front one, but the replacement seems to be holding on well, you need to make sure the surfaces are properly clean and you get enough heat on the adhesive.

Make sure you stick some photos up if you decide to go for it :)

[andyedge 26]

What's the recommendation on a white car?

DMB are excellent :P

White & chrome :D

[Philf1 1,703]

I put DMB's on my MK7 and think they look good. Trick I used was to give the original blue car badge a really good clean with an alcohol wipe dry it with a clean cloth and then not only heat up the stickers but also the badge on the car with a hair dryer. Put them on in November and have had no problem with them at all.

[b1g_dav3 358]

I ordered some carbon ones for my silver car which look great, but no point putting them on now with it going soon :P

[andyedge 26]

I put DMB's on my MK7 and think they look good. Trick I used was to give the original blue car badge a really good clean with an alcohol wipe dry it with a clean cloth and then not only heat up the stickers but also the badge on the car with a hair dryer. Put them on in November and have had no problem with them at all.

+1

Used the exact same technique & still looking good after 3+ years & countless washes B)

[Brigante 332]

+2

I just used a sponge and soapy water to give the stock ford badges a quick clean, dried with a tea towel then i heated up the back of the overlays with hair dryer while they was still on the paper, as well as heated up the stock badges. then i stuck on the overlays n applied more heat while smoothing it round with me fingers

all badges are stuck on solid n aint budged

[PhillBirkett 0]

Cheers for all the tips on application, will be getting some pics up next week gone with green writing on the black background!

[CharlieFarlie 32]

So you stick these over the top of the original blue badges ? Are they shaped or curved then ? Or do they simply flex over the existing badge ?

Cheers

[sambooka 13]

They flex over the existing badge

[Red Baron X 0]

I have just ordered some for my MK7 facelift and as they were not listed I contacted DMB direct and advised me to order the MK6 Standard ones as they would fit. I have been a bit different though and gone for some AUTOBOT ones with black background and red logo so should look the part on my red Zetec S.

[Stogies 8]

Yeah, I went in a different route too and purchased the Batman Gel's. I get a lot of looks from passers by, have had a few people take pics and a few tips from customers. :)

[MattDRX 440]

Bumparoo!

For some stupid reason I want a Set now, but they need to match all round, anyone seen any that Cover both front, Back and the Wheels at all? can't see them on that DMB site? Need black and Red to suit the ST badges?

Anyone comment on the Quality after a few washes, mway treks, Sahara desert excursions on the M25? hopefully they lasted people longer than a few weeks.

[vinnyvangough 32]

Taken from the DMB website

With effect from the end of June 2014, DMB Graphics Ltd will no longer supply any GEL badges which have the FORD script.

This will not affect any of our other GEL badges. This only applies to the Badges that are applied to the Front or Rear of the car and the wheels.

Custom items with other text, other symbols etc... will still be made.

This does NOT affect any other of our licensed products. ONLY the Ford GEL badges.

This decision has been made by Ford Motor Company and not by ourselves at DMB.

Please inform everyone to BUY THEM NOW before they are gone.

UPDATE: As Stock is running down very quickly some items/vehicle models/colours will disappear from the menus. NO custom orders/colours will be made for these items once they are gone from the menu system.

[royston04 2]

Bit of heat and a good clean of the old badge and there done.

Sent from my iPhone using Ford OC

[Lennox8270 15]

Thanks To DMB Graphic For Hooking Me Up With Some Custom Centre Cap Overlays.

[jcs95whufc 15]

I want white ford overlay badges for my mk3 zetec s focus...DMB no longer sell them any idea or can someone give me a link to where I can get them? I've googled everywhere!

[Lennox8270 15]

Dmb do the focus one but not with Ford

[jimrex 50]

DMB were officially licensed by Ford to produce them but I believe Ford withdrew the licence earlier this year... there may be stock floating about somewhere, have you tried eBay?

The reason I say that is DMB were at Ford Fair this year, along with a stall next to them with no apparent company name selling overlays

Sent from my iPad using Ford OC