rnem_uk Posted March 26, 2013 Share Posted March 26, 2013 Hi folks, My father-in-laws mk2.5 titanium gave an enginine failure error which has now cleared. Can you still access that data on the dash display. I know on the mk2, you could get it by switching to position 3 and holding trip reset. Is that facility available on his? Cheers, Rob Quote Link to comment Share on other sites More sharing options...
vince_13 Posted March 26, 2013 Share Posted March 26, 2013 i did the diag test on my mk2.5 fine, follow the instructions in the post below, as for retreiving error codes, i dint know if you can recover the error codes when they have dissapeared http://www.fordownersclub.com/forums/topic/1486-focus-dashboard-secret-trick/page-2 Quote Link to comment Share on other sites More sharing options...
rnem_uk Posted March 26, 2013 Author Share Posted March 26, 2013 Thanks.... found this buried in the post: On keyless power start.1)hold trip reset button in.2)Short press half way down of the power button , displays II position lights.3)Continue to hold trip reset button.4)Menu comes up and click trip reset button to scroll through . Quote Link to comment Share on other sites More sharing options...
vince_13 Posted March 26, 2013 Share Posted March 26, 2013 sorry my mistake only just realised it says "with start button" glad you sorted it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.