b1g_dav3 Posted April 22, 2013 Share Posted April 22, 2013 Unfortunately because of the design of the front grill you need to sand part of it to give a flat surface otherwise there isn't enough surface to stick it onto. Also by doing this it makes it flush with the surrounding grill. As far as how sticky it is, it is pretty sticky and, having used similar items before, will be pretty much on for good. If you get the OEM one's they're sticky enough to hold, but they are nearly £14. Quote Link to comment Share on other sites More sharing options...
ayrshiredude Posted April 22, 2013 Author Share Posted April 22, 2013 http://www.ebay.co.uk/itm/111045913414?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 thats the ones I have used Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 22, 2013 Share Posted April 22, 2013 When I tried getting some off eBay they were huge, so ended up just nipping to Ford. Those being the same size though aren't half bad, just depends how sticky they are, Ford's are practically bonded to the grill they're so strong. Doubt I'll spend on another for the new car though, just leaving mine largely stock, did too much playing with the last one :P They look pretty smart though in fairness on the facelift. Quote Link to comment Share on other sites More sharing options...
ryanfaye167 Posted April 23, 2013 Share Posted April 23, 2013 Ok thanks already bought one off eBay now so will see how that ones goes when i get my car :) Quote Link to comment Share on other sites More sharing options...
FiestaZS90150 Posted May 22, 2013 Share Posted May 22, 2013 Added the S badge to the front and rear of the car. Darved out a space in the front Grille so it would sit flush similar to the ST's. What do you think? looks great i had the same idea, =) did you buy the stick on ones? And could you explain or shoy the tool that you used? i guess you just sanded away the protruding plastic that was in the way so that the badge would fit flat on the plastic ? Quote Link to comment Share on other sites More sharing options...
FiestaZS90150 Posted May 22, 2013 Share Posted May 22, 2013 When I tried getting some off eBay they were huge, so ended up just nipping to Ford. Those being the same size though aren't half bad, just depends how sticky they are, Ford's are practically bonded to the grill they're so strong. Doubt I'll spend on another for the new car though, just leaving mine largely stock, did too much playing with the last one :P They look pretty smart though in fairness on the facelift. how much at a ford dealer? Quote Link to comment Share on other sites More sharing options...
E5GDM Posted May 22, 2013 Share Posted May 22, 2013 Added the S badge to the front and rear of the car. Darved out a space in the front Grille so it would sit flush similar to the ST's. What do you think?I like the one on the front, not so keen on the one on the back. IMO would look better with a Zetec badge, not the ecotechnic badge. That's why I de badged. Quote Link to comment Share on other sites More sharing options...
FiestaZS90150 Posted May 22, 2013 Share Posted May 22, 2013 oh you took all of them off. I told the guy at the dealer that i hoped it didn't come with the econectic badge. Mine is the first he will receive (they are only coming out end of june here in France) so he doesn't know if its on them or not. But he said that if it is they will take it off for me lol. Now that i see yours i think i might ak them to take all of them off lol. Looks great =). Quote Link to comment Share on other sites More sharing options...
Willy Posted May 23, 2013 Share Posted May 23, 2013 Here is mines with the red DMB as you can see, it's a bit off the correct red tone but blends well, but the big chrome O stands out too much =[ If your looking for the Zetec S look then check out my link HERE 1 Quote Link to comment Share on other sites More sharing options...
beckiee92 Posted July 2, 2013 Share Posted July 2, 2013 How do you change the bulbs? do you need to take the bumper off as i've been told? I'm changing mine tomorrow! Quote Link to comment Share on other sites More sharing options...
welshy_maverick Posted July 2, 2013 Share Posted July 2, 2013 I'll be putting my HID's and CREE's in probably the day I get mine :P shame there's no options for the high beams though, HID's might blow if used to flash -.- funny, b1g_dav3, said he has them in dipped, full and fogs with no issue. Check out the link below towards the bottom of the page: - http://www.fordownersclub.com/forums/topic/43613-what-have-you-done-with-your-car-today/page-10 Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted July 2, 2013 Share Posted July 2, 2013 On the ZS; You need to pull the headlight units out of the car, which have a couple of screws in and a few in the cover need to come off, then a strong yank and they're out. Fog lights, take a few of the torx screws from the wheel arch and they're easy to access. Best thing for the headlights is this: http://www.fordownersclub.com/forums/topic/12391-guide-mk7-fiesta-bulb-change/ it's the prefacelift but it's pretty much the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.