Jump to content
Do Not Sell My Personal Information

Ecoboost Engine Cover For The 1.0 Fiesta.


Willy
 Share

Recommended Posts

okay thanks =)

Link to comment
Share on other sites


Nick. Chris is right, there is also a mounting kit which comprises of 2 extention bolts. Didn't get the part numbers but they are about £2.50 each.

Which dealer did you get these from as mine states only 1 of the two are available to order

Link to comment
Share on other sites

Right you lot this is what I've found out.
There is only one bolt needed. The part number is 1683973
I've taken mine off to see what's what and added some pictures.

To fit you'll need to take the air box pipe and oil filler cap off.

post-5052-0-95094300-1373650146_thumb.jp
post-5052-0-41096500-1373650174_thumb.jp

The bolt

post-5052-0-91868400-1373668015_thumb.jp

Edit

I've since found out that 2 studs are required and they are listed at the beginning of this thread.

  • Like 1
Link to comment
Share on other sites

Just posted a question in the Focus section requesting pictures of the mounts to compare HERE.

Link to comment
Share on other sites


  • 6 months later...

Focus Mk3 1.0 Ecoboost cover fits Fiesta Mk 7.5 1.0 Ecoboost :)

  • Like 1
Link to comment
Share on other sites

Focus Mk3 1.0 Ecoboost cover fits Fiesta Mk 7.5 1.0 Ecoboost :)

Thanks for the answer :)

There is only one bolt needed. The part number is 1683973

And as It is fixed to the left side, just hanging in the air?

Link to comment
Share on other sites

Only one fixing on the right side of the engine. Nothing on the left so it rests on top of the engine block. oil cap also holds cover in place.

Link to comment
Share on other sites

  • 9 months later...

Hi Guys,

Have just fitted engine cover (Part number 1806222) to my wife's Fiesta 2014 Titanium 1.0 eco boost 125.

You can use TWO fixings at the back- part numbers 1683973 and 1780192.

Looking from the front of the car, the back left fitting screws on to a threaded bolt which is already in place. The back right fitting has a threaded screw at one end which fits into a thread on the block.(see location in photo posted previously in this thread).

As also mentioned previously you need to take the air box pipe off and the oil filler cap.

The cover at the back left fouled a pipe when I first tried to fit it so a very small section of the rubber cover needed to be removed with scissors so that it will push down onto the fitting.

At the right side the air box pipe when refitted is in contact and up tight against the cover. I intend to monitor this and if necessary do another slight modification to the cover to give some clearance.

Spoke to friendly service guy who said that the cover was not fitted originally because of the tight clearances and the need to take the air box pipe off to remove the cover.

Parts department Manager told me that cars (Focus 1.0 ecoboost)) built after March this year have different fittings/cover arrangement.

Rob

  • Like 2
Link to comment
Share on other sites

  • 4 months later...

Has anyone got an engine cover with there 1.0 EcoBoost Fiesta's ?

I'm thinking of getting one and wondered if I could get a freebee from Ford ;)

http://www.european-parts.net/catalog/product_info.php/cPath/160_161/products_id/1476/osCsid/f0vm0117dfh6bnkglo41ifdnt7

attachicon.gifIMG_4538.jpeg

Cover

Part No 1806222

Price £30.58

Fixing bolt

Part No 1683973

Price £2.50ish

Willy.

Did you end up buying this from Ford. Or from the website mentioned?

Link to comment
Share on other sites


Done mine too:

Before

post-62796-142565286543_thumb.jpg

After

post-62796-142565287605_thumb.jpg

Couldn't find where the fixing bolt had to go though? As the cover literally just "pushed" into place. I think the only thing that's holding it into place is the oil cap.

Link to comment
Share on other sites

Scrap that, found it. Lol :D

post-62796-142565355807_thumb.jpg

Link to comment
Share on other sites

Not as good as mine :p

20140901_141816_zpsgbfbel8x.jpg

  • Like 1
Link to comment
Share on other sites

Willy... just noticed you've changed to a 2015 Titanium X? What was wrong with your 2013 Titanium?

Link to comment
Share on other sites

Nothing :)

Just really wanted keyless / electric rear windows so traded for a Titanium X the same colour ;)

  • Like 1
  • Haha 1
Link to comment
Share on other sites

Fair enough! :rolleyes:

Now get hiding that OBD port ;) (mine's keyless!!)

Link to comment
Share on other sites

Getting one as I type

Link to comment
Share on other sites

Scuse my ignorance but why would you want an engine cover?

Link to comment
Share on other sites

Personal preference really

  • Like 2
Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership