Retrofit Bluetooth Audio Not Working

[philiprbrown]

Sorry for the delay in replying, been away for a while.

From memory and with the glove compartment removed, there was a wiring loom on the LHS. Part of tis was covered with the grey sticky backed foam. Once this was peeled back the audio patch lead was there.

Mine (on a 2010 focus titanium), had a cable loop already plugged in. It was this loop that had to be replaced to make the system work. I do not know if there is a cabling difference between the 2009 and 2010.

Hope this helps a little

Phil

[werewhelk]

Sorry for resurrecting this old thread, I wondered if one of you guys (or anyone) could do me a huge favour and post a copy of your saved SRM config file from ELMconfig. This is a duplicate of a question I already asked in the modifications section, but maybe that wasn't the best place (sorry again).

In a nutshell, I bought a used module 8M5T-19C112-AS off eBay but I can't get it to work properly, and I wanted to have a go at restoring a known working config file onto it. At this stage I figure there's nothing to lose by trying it.

Really appreciate any help!