Jump to content
Do Not Sell My Personal Information

Help With Wiring Footwell Leds?


M4RC
 Share

Recommended Posts

Hi, I would like to wire footwell LEDs as my car doesn't have them. - (drivers and passenger side). Preferably I would like them to come on with the dome light eg. When you open the doors or unlock car etc. Just wondering where the best place to run the cable would be, if it's to hard then I'll just have to take a supply from the cigarette lighter or something.

Thanks

Link to comment
Share on other sites


Do you mean you don't have footwell lights at all ??? If so, you'll need to run a wire direct from your interior (roof) light, this shouldn't be to difficult.

Link to comment
Share on other sites

I have a guide link under this post if viewed on a computer.

The guide is for a Focus but the routine will be roughly the same.

Link to comment
Share on other sites

Do you mean you don't have footwell lights at all ??? If so, you'll need to run a wire direct from your interior (roof) light, this shouldn't be to difficult.

Yeah,that's right I have no footwell lights atall so I'll need to run a wire from the roof light to the foot wells but I have no idea what route to use??

Link to comment
Share on other sites

I have a guide link under this post if viewed on a computer.

The guide is for a Focus but the routine will be roughly the same.

Can't get it to work :( only have an ipad not a computer

Link to comment
Share on other sites


Can't get it to work :( only have an ipad not a computer

Ah, i guess iPads don't handle PDF?

Try installing Kindle reader, that will display PDF files.

Link to comment
Share on other sites

Ah, i guess iPads don't handle PDF?

Try installing Kindle reader, that will display PDF files.

Nah, that doesn't work either. You have to download the file and then view it on that app but I can't download it

Link to comment
Share on other sites

Converted the PDF pages to jpg images for you.

Hopefull that works better.

Bear in mind that the guide is for the Focus so some bits may not go the same, if you don't have bulb holder mounting points then you can substitute adhesive LED strips attached to any convenient under dash trim.

post-28494-0-81831900-1386418008_thumb.j

post-28494-0-90280800-1386418014_thumb.j

post-28494-0-77136700-1386418020_thumb.j

post-28494-0-68713900-1386418027_thumb.j

post-28494-0-31315700-1386418033_thumb.j

Link to comment
Share on other sites

Thanks! I ordered led strips and cable so I'll give it a bash when they arive

Link to comment
Share on other sites

Does anyone know some sort of connector I can use so if I wanted to disconnect them I could just unclip it and then clip it back in sort of thing?

Link to comment
Share on other sites

You can get a sort of plug for it i guess, just a pos neg car plug like what you have connected to a headlight im sure u can find one at maplin

Link to comment
Share on other sites


Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership