pisco Posted January 8, 2014 Share Posted January 8, 2014 I bought a Mk1 Zetec with only one key. I have a spare ford remote fob is it possible to set it up on this or does it not have remote unlock? (It does have air con/climate pack/central locking) Cheers Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 9, 2014 Share Posted January 9, 2014 Hi Kim, I think the way to check is to remove the interior light. if you have central locking, you should see a small box up in the lining of the roof just above the windscreen? Quote Link to comment Share on other sites More sharing options...
pisco Posted January 12, 2014 Author Share Posted January 12, 2014 Nope nothing in the lining apart from the antenna and the light. I have central locking though. Unlocking the drivers door unlocks the rest. Anyway to reverse fit it? Would something like this work? LINK Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 13, 2014 Share Posted January 13, 2014 a kit like that probably would work, although it may not be active in the car so may need adding on with the use of Ford approved software. It does sound like you dont have it in there already though. Quote Link to comment Share on other sites More sharing options...
pisco Posted January 13, 2014 Author Share Posted January 13, 2014 OK I have ordered one, just got my Haynes manual today. So now I need to find all the wires I need to tap into to plumb it in. I take it most will be at or near the fusebox behind the glove box? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 14, 2014 Share Posted January 14, 2014 That would ordinarily be where you need to access to be honest, but you might find some wires run in from the engine bay. I havent done this install personally but we can offer advice as and when! Would you be willing to make an installation guide to share on the forum incase anyone else wants to do this mod? Quote Link to comment Share on other sites More sharing options...
pisco Posted January 14, 2014 Author Share Posted January 14, 2014 Sure when I get the bits and have time (and less rain/snow) I will give it a go. Just studying the HM at the moment to trace the wiring. Quote Link to comment Share on other sites More sharing options...
pisco Posted January 23, 2014 Author Share Posted January 23, 2014 Mod posted in the howto section as requested. Just needs the pics taken and added. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 24, 2014 Share Posted January 24, 2014 All working a treat Ken? Quote Link to comment Share on other sites More sharing options...
pisco Posted January 24, 2014 Author Share Posted January 24, 2014 Yep when you have been used to remote un/locking it is amazing the difference when you get a car that doesn't have it :) Now I am happy :D (with the locking anyway ) Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 24, 2014 Share Posted January 24, 2014 Result, and an excellent contribution to the guides section, and certainly will look slick with all the pictures and its brazen glory! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.