Jump to content
Do Not Sell My Personal Information

2001 Ford Focus Issues Please Help


Mini-sean
 Share

Recommended Posts

Hi i have a 2001 Ford focus 1.8, manual

For the past few months its been very sluggish just dont seem to have any power.

Ive had it pluged in and its come up with the following codes...


P0181- fuel temp sensor A circuit Range & Performance


P0761- Shift Solenoied C performance or stuck off


P0007 Fuel Shut off valve A Contro; circuite high


P0420 Catalyst system efficiency below threshold bank


What do i need to do/buy to fix it



Thanks for your time sean

Link to comment
Share on other sites


not as simple as that im afraid

first step, clear those codes, take it for a run and check to see which, if any, codes return

think the P0420 could be the code you might see again

Link to comment
Share on other sites

codes was cleared last week nothings come back up yet but still has no power, the mechanic i use has told me to replace the cat or de cat it and that should sort it do you think this is right?

Link to comment
Share on other sites

given youll fail an mot for a decat now youre mechanic shouldnt be saying that

Link to comment
Share on other sites

has the cat actually been tested, or the 02 sensors?

if not, then even though he could well be right, could also be a blocked exhaust, or a variety of other possibles.

without proper testing of the system, your taking a gamble

Link to comment
Share on other sites


Its had a new stainless exhaust last week so cant be that, the MOT isn't an issue,

is the 02 sensor the lambda sensor? as ive put a new one of them and a mass air flow sensor on within the last month?

he said its more than likely the cat as he says they are a known problem on the focus!

and thanks for the fast replys

Link to comment
Share on other sites

wouldnt agree they are a known problem, cats can last the lifetime of the car, but they are also quite fragile given the right conditions for them to fail..thats any car, not just a focus

what were the reasons for changing the 02 and air mass?

Link to comment
Share on other sites

i just changed them becuse it was sluggish as its been like that for a while with no lights coming on, just tried the cheap stuff before i start paying for cats etc

Link to comment
Share on other sites

would have been cheaper to get a diagnostic done

without knowing what the engine is actually doing, any changes is a pure gamble, may well have nothing whatsoever to do with cat/sensors.

its up to you, but i would recommend either a diagnostic or at the very least an exhaust gasses test before throwing more parts at it in hope

Link to comment
Share on other sites

its had a diagnostics done that's where i got the codes from??

and exhaust gases must be fine as it had its mot like this and passed emissions test fine,

Link to comment
Share on other sites

by diagnostic, was the live data checked, or just codes checked?

would help a great deal if you give us the full info in order.

such as

was the o2 sensor and air mass changed before or after the mot?

do you have a copy of the exhaust gas readout?

does loss of power show throughout the rev range, or is it just the low end or top end of revs?

does the power loss improve/deteriorate when cold/warm, or is it the same throughout?

anything else been changed/checked since the problem started?

any noticable difference in fuel economy?

any other info you can give us?

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership