Headlamp Wiring Harness Plug...i'm Stumped!

[catch]

Jeez I've had them out before, but I'm totally stumped.

I know I've got to put a flat blade screwdriver some where, do something with it to enable the wiring harness plug to unlock from the headlamp socket. But I'm beggered if I can do it. Mind you I'm working blind as the wiring harness is not letting me see the plug arrangement face on.

Anybody got some "precise" instructions.............I've alreadty tried the stick a srewdriver in it and push it up.....it's the "it" bit that is causing me problems in that I don't know what "it" is

Never mind, I sorted it out :D I'll do a guide on it sometime .....in case I forget again.......I obviously just needed a sit down in front of the computer :)

[salsheikh]

my plugs are knackered too and i use a screwdriver to push the lug out and this enables the connector to come out too if you know what i mean!

[btmaldon]

I can remember mine were a pain. I didn't stick a screw driver in them though. It was a case of squeezing them in the right place and they came apart.

[catch]

I do that with the wifes thighs, though it never crossed my mind to try it on the lamp sockets :D

[btmaldon]

I do that with the wifes thighs, though it never crossed my mind to try it on the lamp sockets :D

:D . In my wifes case that would be impossible to achieve by hand. I would probably need a couple of tree surgeons.

[salsheikh]

[catch]

Well Bruce,

my wife would not be seen dead following my posts on a car forum, but if she did, I reckon I would be lambasted [again]

However if your wife was to follow your posts, I reckon you would be dead