greg titanium Posted April 29, 2014 Share Posted April 29, 2014 i have a 56 plate 2007 titanium ford focus i am having quite a bit of trouble with converting lights, as i thought would have been a straight swap from halogen to projectors but i have a problem of a 7 pin plug on my car not a 10 pin. does anyone no what the wires on the 10 pin are for or even better how it can be done thanks very much for any help given i am ready to pull my hair out Quote Link to comment Share on other sites More sharing options...
xdazx Posted April 29, 2014 Share Posted April 29, 2014 Can you not buy a connecter from a 7 pin to 10 or viser versa ? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted April 29, 2014 Share Posted April 29, 2014 Moving to the Focus section! Quote Link to comment Share on other sites More sharing options...
greg titanium Posted April 29, 2014 Author Share Posted April 29, 2014 no unfortunately because the whole wiring set up is different, so i need to find out what ports 1 to 10 do individually wish it was easy Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted April 29, 2014 Share Posted April 29, 2014 1 is ground/earth and the other two is for the motor I can't remember what pin is earth and that's all you'll need to get them to turn on... Without self leveling sensors the xenons will aim at its lowest possible position all the time you'll barely be able to see anything at night Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
greg titanium Posted April 29, 2014 Author Share Posted April 29, 2014 Thanks very much for that will they also activate the the sidelights and when I turn them on will they do that the fancy up and down adjustment and then point at the floor Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
greg titanium Posted May 2, 2014 Author Share Posted May 2, 2014 So can I just add them to the 7 pin or does it need rewiring over all Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.