minimadgriff Posted May 5, 2014 Share Posted May 5, 2014 Afternoon All,To those that have retrofitted OEM xenon headlights to their Focus and already had the 10 pin connectors, what have you done with the levelling?The pin configuration is the same between halogen and xenon if you have the 10 pin connectors on the halogen lights but the manual levelling doesn't work once you fit the Xenon's. I believe this is because the 4 wire servo motors work differently to the halogen 3 wire stepper motors.Have you switched the wires round to get the manual levelling to work with the xenon motor or swapped the motors and put the halogen motor in the xenon lamp unit?Thanks in advance, Quote Link to comment Share on other sites More sharing options...
minimadgriff Posted May 6, 2014 Author Share Posted May 6, 2014 No one? Quote Link to comment Share on other sites More sharing options...
gurcayy Posted May 6, 2014 Share Posted May 6, 2014 I've done this retrofit in the past, but I've forgotten the details. But I remember that I used the old leveling motors from the old headlights. Quote Link to comment Share on other sites More sharing options...
minimadgriff Posted May 6, 2014 Author Share Posted May 6, 2014 Thanks, :) Did you have to swap any pins around? Quote Link to comment Share on other sites More sharing options...
gurcayy Posted May 6, 2014 Share Posted May 6, 2014 I had 7 or 8 pins of 10 and I've made plenty of changes to the pins, but I don't think that I've made any changes to the leveling motors. I've just cut the cables and reconnected them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.