nazsky786 Posted June 6, 2014 Share Posted June 6, 2014 I need some help with this mod, I'm thinking I will have to tap into the driver foot well light. I want to put led light strips on the side skirts. So when you lock and unlock doors the side skirts will light up. I think this would make the car look so good at night. And light up when in reverse so helps see curb at night to stop alloy scratching. Any tips will help. 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 6, 2014 Share Posted June 6, 2014 There will be grommets in the footwell pans under the carpets. You could run wiring through there but be very sure that the holes are well sealed afterwards and that the wiring does not touch anything hot or likely to affect functionality/safety of the car. 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 6, 2014 Share Posted June 6, 2014 I need some help with this mod, I'm thinking I will have to tap into the driver foot well light. I want to put led light strips on the side skirts. So when you lock and unlock doors the side skirts will light up. I think this would make the car look so good at night. And light up when in reverse so helps see curb at night to stop alloy scratching. Any tips will help. Hi, Best to run the cable through the grommet that the reverse light loom exits from, You will require additional cable and a relay. Run a single positive feed from the footwell lighting to the boot, Followed by A twin core loom to either side skirt, In the boot splice the reverse light positive and negative, 2 way relay to ensure no overload, And footwell feed, Best to see my dual reverse light guide to show you How to access the boot grommet, Splicing cables, Operation of a relay, How to splice a relay, And where to purchase everything from See here: http://www.fordownersclub.com/forums/topic/29347-guide-fitting-second-reverse-light-ford-focus-mk2-mk25/#entry158997 Any questions feel free. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 6, 2014 Share Posted June 6, 2014 Just done a relay myself, nice and easy really! but I recon this could look pretty sweet, why stick at just LED's - why not go neons?! 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 6, 2014 Share Posted June 6, 2014 Just done a relay myself, nice and easy really! but I recon this could look pretty sweet, why stick at just LED's - why not go neons?!neons draw too much power and soo 90's LED is brighter and lower battery consumption :) Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 6, 2014 Share Posted June 6, 2014 You could use EL wire. Very Tron ;) Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 6, 2014 Author Share Posted June 6, 2014 I need a bright light that will light up the curb as there is no light and I end up scrapping my alloys and if there is light the it's better. Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 6, 2014 Share Posted June 6, 2014 I need a bright light that will light up the curb as there is no light and I end up scrapping my alloys and if there is light the it's better. EL's will give a good light spread without being too glary. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 6, 2014 Author Share Posted June 6, 2014 Led look way better. El look abit , well rubbish compared to led. 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 6, 2014 Share Posted June 6, 2014 Led look way better. El look abit , well rubbish compared to led. +1:) Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 7, 2014 Share Posted June 7, 2014 Tiocfaidh :) or eh +1 Whu? Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 Which pins on the relay go where? I need the lights to activate when I open the doors, turn off when doors are locked, turn on when in reverse and turn on with the remote for show purposes. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 24, 2014 Share Posted June 24, 2014 This is the best picture I have found as far as wiring a relay is concerned. To summarise: Pin labelled: Job: 85 Earth strap 30 or 51 Live connection (from battery or fusetap) 86 The trigger wire 87 The end result. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 Ok so I run a wire from the foot well light positive and connect to 87 and run a wire from reverse light to 87. Ground 85 to car body. Ground lights to car body and positive to 51 from car battery. 86 is going to be a signal wire? So run a positive feed to it when I wish to just have them on for show? Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 Na that's wrong. Can a relay take 3 signal inputs? Reverse, football, and show. Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 24, 2014 Share Posted June 24, 2014 Na that's wrong. Can a relay take 3 signal inputs? Reverse, football, and show.fit a 2 way switch and a relay, Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 I actually don't know how that would work? Would that mean I manually have to activate the lights then? What about 2 relay? Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 24, 2014 Share Posted June 24, 2014 Interior positive option 1 Illuminated door option 2 Relay will then cut in for reverse regardless of switch option So by default have them set to option 2 Reverse then cuts in automatically and option 1 for show happens when you flick the switch Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 That you. Do you know how to wire the complete thing up? Relay points and how to wire up the relay? Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 Auto correct is crap. I mean Thank You. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 24, 2014 Share Posted June 24, 2014 what you would do is get a spade connector, and then run a wire from all the sources, and crimp them together, so you have three possible sources to trip the relay. Then when any of the three send a signal down the wire it closes the switch in the relay and powers the devices. so in your case: Pin labelled: Job: 85 Earth strap - any source of earth (bolt, or tap into another existing earth wire. 30 or 51 Live connection (from battery or fusetap) - Fuse it, or at least fuse 87 86 The trigger wire - so where you take the reverse, positive from the switched light, and into a remote switch (so for example, you could put another fusetap in that will then go into a 12v remote and also close the circuit. 87 The end result. - i.e. the positive to your LED's you want to use. then you just need to earth them I have a 12v wireless remote that you basically put the positive and negative in both, then when you press the switch, it closes the connection and powers through the remote. only cost a tenner from amazon. Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 24, 2014 Share Posted June 24, 2014 That you. Do you know how to wire the complete thing up? Relay points and how to wire up the relay?yes :) Ill do a guide later, Heres my guide for GenLabs Relays you need a DRLR1 from genlabs if you dont already have a relay http://www.fordownersclub.com/forums/topic/31832-guide-fitting-auto-dimmer-unit-from-gen-labs-to-gauges-or-drl/ Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 24, 2014 Share Posted June 24, 2014 (edited) Also see my reverse guide for the DRLR1 from genlabs, Ive used it for my rear fog light See link here, read the posts where ive explained the DRLR1 http://www.fordownersclub.com/forums/topic/29347-guide-fitting-second-reverse-light-ford-focus-mk2-mk25/page-7 Edited June 24, 2014 by Lenny Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 24, 2014 Author Share Posted June 24, 2014 But if you attach att the feed together won't that trigger all the light to come on? For example I unlock doors the lights come on but so would the reverse light? Quote Link to comment Share on other sites More sharing options...
Lenny Posted June 24, 2014 Share Posted June 24, 2014 But if you attach att the feed together won't that trigger all the light to come on? For example I unlock doors the lights come on but so would the reverse light?you may need two relays, ill write it out later around 17:00The relay is one way flow, It only sends power to the lights when reverse is active, It cant send power from lights to reverse Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.