Lenny Posted July 18, 2014 Share Posted July 18, 2014 Fitted the bonnet lip, not happy with the fitment of it though (aftermarket part). So going to paint the OE one but broke the two end lugs.....will it still go on with strong tape?You could bond it with Tiger Seal or 3M Tape, A Genuine primer grey bonnet lip from for is 28 pounds Quote Link to comment Share on other sites More sharing options...
Andy.B1971 Posted July 18, 2014 Share Posted July 18, 2014 Thanks for that Jamie, looking good , im not keen on the silver strip either didn't know euro did bits I will have to investigate. power to the TDCI B) 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 18, 2014 Author Share Posted July 18, 2014 No probs Andy, I wouldn't bother with the lip from Eurocarparts....corners don't fit properly.....preped and primered the OE lip to go back on once painted. :-) Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
Andy.B1971 Posted July 18, 2014 Share Posted July 18, 2014 Ah ok noted, before you fitted your filter and blanking plate did you have little or very poor acceleration at very low revs ? mine is utter pants.... Andy 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 18, 2014 Author Share Posted July 18, 2014 Didn't pull off to well from a stand still, lovely and smooth now. Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
Andy.B1971 Posted July 18, 2014 Share Posted July 18, 2014 1last question has fitting the blanking plate affected the mpg ? Thanks Andy 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 19, 2014 Author Share Posted July 19, 2014 It's gone up a few mpg, so all good. :) Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 19, 2014 Author Share Posted July 19, 2014 OE bonnet lip painted, a lot better finish. Will fit tomorrow. :) Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 OE bonnet lip fitted, looks loads better. :Do And stealthy owners club sticker. :D 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 OE bonnet lip fitted, looks loads better. :Do[/url And stealthy owners club sticker. :D Looks much better mate, The ST lip is available from ford in Primer Grey for 28 GBP if anyone is interested or like me snapped chrome plated lip on removal its FINIS 1549578 Also have you considered colour coding the rear view mirror? I think it would tie in nicely with the membership window decal, because when the sun shines through, it would cast a shadow of the badge on the rear of the mirror, if the mirror was a light colour then the shadow would be more visible. See here: http://www.fordownersclub.com/forums/topic/22192-spraying-rear-view-mirror/?pid=125448 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 Cheers Lenny, I did snap two tabs off but glued them back on lol Not sure on the rear view mirror, next in line is the lhd reverse light. :D Sent from under the bonnet Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 Cheers Lenny, I did snap two tabs off but glued them back on lol Not sure on the rear view mirror, next in line is the LHD reverse light. :D Sent from under the bonnet clear fog unit is a nice mod in itselfhttp://www.fordownersclub.com/forums/topic/26900-rear-fog-light-conversion-guide-focus-2008-2010/ Then dual reverse is the icing on the cake :) http://www.fordownersclub.com/forums/topic/29347-guide-fitting-second-reverse-light-ford-focus-mk2-mk25/ 2 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 Might get a tail pipe welded on too.....tidy up the rear. Sent from under the bonnet Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 Might get a tail pipe welded on too.....tidy up the rear. Sent from under the bonnet hard to keep them clean with the diesel but autosol is great stuff for polishing and protecting the surface, A twin exit slash cut would be nice. 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 Yeah, got plenty of autosol.....I do like slash cuts.....was thinking twin slash cut but not twin exit. Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 A few pics I took today. :D 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 Yeah, got plenty of autosol.....I do like slash cuts.....was thinking twin slash cut but not twin exit. Sent from under the bonnet pictures look great, yeah i ment twin pipes would look great not a duplexsomthing like this: http://www.piperexhausts.co.uk/piperstore/product_info.php?cPath=26_230_461&products_id=4321 2 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 Cheers Lenny lol :D Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
Andy.B1971 Posted July 20, 2014 Share Posted July 20, 2014 That is looking sweeeeet me old mucker , I will follow keenly re the reverse light mod :D 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 Cheers bud. :D Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
Lennox8270 Posted July 20, 2014 Share Posted July 20, 2014 No, everything works as normal. Sent from under the bonnet I've ordered my EGR blanking plate do you have any tips ?Sent from my SM-N9005 using Ford OC mobile app 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted July 20, 2014 Author Share Posted July 20, 2014 I've ordered my EGR blanking plate do you have any tips ? Sent from my SM-N9005 using Ford OC mobile app Not really, just follow Lenny's guide and you can't go wrong. :) Sent from under the bonnet 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 I've ordered my EGR blanking plate do you have any tips ? Sent from my SM-N9005 using Ford OC mobile app Not really, just follow Lenny's guide and you can't go wrong. :) Sent from under the bonnet Heres the EGR blanking guide for the 1.6TDCi http://www.fordownersclub.com/forums/topic/42915-guide-fitting-egr-blanking-plate-16tdci-engine/ You should see a slight increase in MPG from EGR blank/Delete I recommend fitting a direct replacement performance induction filter, after you blank the EGR Why? Because when the EGR was in operation the engine took up to 30% of its induction from the exhaust, Now the engine takes 100% fresh clean Induction from the atmosphere, so a less constrictive induction filter helps improve things along with EGR blanking. Stock filter inside: Upgrade Filter Inside: A lot less restriction allowing the engine to breath more smoothly on a turbo engine also helps increase MPG see my Guide on Green Cotton Performance Induction, it has a 10% Discount code aswell: http://www.fordownersclub.com/forums/topic/36783-green-cotton-performance-induction-filter-fitting-guide/ Blanking the EGR also prevents excessive amounts of Carbon build up in your engine oil, It is the build up of carbon which slowly builds up around the "turbo oil feed pipe" restricting the flow of oil feeding to the turbo, Which ultimately leads to turbo failure, So after you have blanked/Deleted the EGR valve, i recommend using a Can of "Wynne's Engine Flush" on your next oil change, The can costs less than 5 GBP It breaks down the built up carbon and sludge inside the engine caused by the operations of the EGR, I've used Wynne's engine flush many times and found it very effective, always follow instructions. Here's a link: http://www.halfords.com/motoring/engine-oils-fluids/fuel-oil-additives/wynns-engine-flush-for-diesel-425ml 1 Quote Link to comment Share on other sites More sharing options...
Lennox8270 Posted July 20, 2014 Share Posted July 20, 2014 Heres the EGR blanking guide for the 1.6TDCi http://www.fordownersclub.com/forums/topic/42915-guide-fitting-egr-blanking-plate-16tdci-engine/ After blanking i recommend upgrading your induction filter if you haven't already done, see guide here aswell as 10% Discount off Green Cotton Performance Induction: http://www.fordownersclub.com/forums/topic/36783-green-cotton-performance-induction-filter-fitting-guide/%22 Also Thanks for the guide lenny but I think im going to get a k&n induction filter. I've also been looking about for and upgraded intercooler Sent from my SM-N9005 using Ford OC mobile app 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 20, 2014 Share Posted July 20, 2014 Thanks for the guide lenny but I think im going to get a k&n induction filter. I've also been looking about for and upgraded intercooler Sent from my SM-N9005 using Ford OC mobile app No problem, I've created a total of 28 guides for the focus, you can see a list of links on my profile page, just click on my aviator picture to view, Regarding the Induction filter anything is better than stock, after blanking your EGR, I plan to eventually upgrade mine to a K&N 57S after i get married, They have dropped in price: http://m.ebay.co.uk/itm/271238138352?nav=SEARCH I know the listing says "RS" but its exactly the same fit for our mk2.5 1.6TDCi bigger lid section housing bigger filter aswell as side port induction, ultimate enclosed air box upgrade. I too would like an intercooler upgrade but awaiting to see reviews from others before investing myself. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.