Hi all, I've been looking for a twin exhaust tip that will fit the 2013 facelift zetec S... Possibly the most awkward exhaust to find a tip for out of all the fords out there! Not only does in angle downwards but it also angles to the side aswell... Does anyone know of any exhaust tips that will fit this? Or any help at all on what alternatives I could do? Not got a huge budget, £40-£50 maximum.

Thanks

Sent from my iPhone using Ford OC

Your only option in being able to fit a tip is to cut the angle off and fit a tip like in my guide below....

http://www.fordownersclub.com/forums/tutorials/article/233-ford-fiesta-mk75-rear-diffuser-upgrade-st/

I've got the car on PCP so I don't really want to do anything to it massively, there's already a cut out that looks like it could fit an exhaust, I'm thinking the only option would be to email a few companies to see if they could custom make one?

Sent from my iPhone using Ford OC

Yeh I know there's a cut out i was saying you could use the tip I used with the standard zetec s bumper maybe, but if you don't want to cut the angle off then your only option is one with the angle, but that would be extremely difficult to get/make.

I knew what you meant :) naa it won't fit through the gap if I cut the angle and attach the ripspeed one but thanks anyway mate

Sent from my iPhone using Ford OC

Ahhh okay mate, reckon it'll be too high for the gap ? could always get someone to make you a custom back box for it with a twin tip :)

Yeah too high and also the gap is to the right, I'll take a picture when I'm in mate

Sent from my iPhone using Ford OC

Yeh I know what you mean, I'd say the best option is to get a twin tail back box made custom. Then when you hand the car back or whatever you can easily put the standard back box back on.

I'd have to cut and weld wouldn't I? It are the just clamped?

Sent from my iPhone using Ford OC

You'd have to cut the standard back box off, then clamp the new one in place and same when you come to put the old one back on.