Hi All,

I have a Ford Fiesta Edge (2011) in White. I'm wanting to make some changes to the interior and exterior but don't have a clue what would be possible. Any suggestions would be nice.

Thanks!

Interior bulbs changed to leds

Exterior bulbs changed to ice white ones.

Exhaust

Lowered

Alloys.

You can pretty much do what you want with it. Depending on how much you want to spend.

Sent from my C5303 using Ford OC mobile app

If it doesn't have alloys that's the first thing I'd get, but I'd go for Ford ones that were designed for the Fiesta, just my opinion there.

Hi All,

I have a Ford Fiesta Edge (2011) in White. I'm wanting to make some changes to the interior and exterior but don't have a clue what would be possible. Any suggestions would be nice.

Thanks!

Rite :)

First tint the rear windows,

Then purchase some black vinyl that looks like tint, wrap the rear boot section as saw in below image:

On the bulbs,

Silvatec Indicator bulbs

Cree led Reverse bulb

Cree led front and rear fog bulbs

Cree T10 parking bulbs,

Osram NightBreaker high beam

Osram Cool blue low beam,

T10 canbus compatible 6000k reg bulbs.

Spray front upper grill gloss black or remove and debadge bumper dent smooth.

Purchase asian grill spray gloss black,

Paint rear diffuser gloss black,

Paint rear brake drums with hammerite smooth silver,

Front calipers blue,

Colour code rear view mirror,

Remove internal dash parts have them hydro dipped carbon i.e stereo face plate. Heater surround panel

Front and rear footwell lighting with illuminated ignition ring,

Triple light interior unit with additional ambient lighting,

Additional boot light aswell as bulb upgrade to 6000k led.

After that the obvious

Eibach lowering springs,

Gloss black 15" alloys no bigger

ZetecS rear spoiler

Twin pipe exhaust muffler,

Green Cotton Performance induction filter,

I'm open to discussion on anything you may also like to add, I've a lot of experience in modifications

It it doesn't have alloys that's the first thing I'd get, but I'd go for Ford ones that were designed for the Fiesta, just my opinion there.

+1 keep an eye on ebay.co.uk

If you purchase same size alloys as your existing steel rims then you can transfer tyres across to the alloys getting your wear out of them.

Cheers guys, first thing I'm getting is some black alloys just don't want to spend a fortune on them.

Also been thinking of just keeping it simple, tinting the rear windows, getting smoked rear lights like these - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=301112715838&ssPageName=ADME:X:RTQ:GB:1123

and putting some tint film over the front head lights.

Not sure of much else though as I don't have much spare cash

Cheers guys, first thing I'm getting is some black alloys just don't want to spend a fortune on them.

Also been thinking of just keeping it simple, tinting the rear windows, getting smoked rear lights like these - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=301112715838&ssPageName=ADME:X:RTQ:GB:1123

and putting some tint film over the front head lights.

Not sure of much else though as I don't have much spare cash

Wolfrace manufacture some nice affordable alloys,

Rota are another affordable alloy wheel manufacturer, just dont forget spigot rings if you're not fitting genuine ford fiesta alloys all aftermarket alloys require spigot rings to ensure the sit tight on the centre hubs