FocusTDDI Posted June 17, 2009 Share Posted June 17, 2009 Hope someone can help with this. The blower in my 01 focus tddi only operates on the number 4 setting. Works fine except it's going to be either red hot or stone cold. Any help would be really appreciated :) Quote Link to comment Share on other sites More sharing options...
fiesta_lad Posted June 17, 2009 Share Posted June 17, 2009 Hope someone can help with this. The blower in my 01 focus tddi only operates on the number 4 setting. Works fine except it's going to be either red hot or stone cold. Any help would be really appreciated :) This could be a heater fan resister, Quote Link to comment Share on other sites More sharing options...
w2575 Posted June 18, 2009 Share Posted June 18, 2009 Agreed ! New rotory switch ! Quote Link to comment Share on other sites More sharing options...
FocusTDDI Posted June 18, 2009 Author Share Posted June 18, 2009 Great, thanks for that, I'll get right on it. :) Quote Link to comment Share on other sites More sharing options...
mintalkin Posted June 18, 2009 Share Posted June 18, 2009 new resistor pack required Quote Link to comment Share on other sites More sharing options...
Whelk8891 Posted June 18, 2009 Share Posted June 18, 2009 Thermal resistor - Its NOT in the switch, its a separate part! Remove the glove box, and you'll see it on the right, behind the blower motor housing. Held in place with one screw and a multiplug attached. Dead easy to replace, about £13 for the part from Ford. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.