Zs 1.0 Sound With Cold Air Induction Kit ?

[NQbbe]

I'd like to improve the sound on my ZS 1.0 - primarily the sound I hear inside the cabin, I care less about the outside sound.

So I'm figuring the most efficient/cheap way is to get a cold air induction kit.

Does anyone have a before/after sound comparison from inside the cabin ?

Also can you recommend a kit ?

[bensambrook]

I'd like to hear this too :)

[jtaylor2005]

Well I would presume it would be very similar to the 1.6's difference as it is basically the same engine just smaller. With a turbo car you will hear the turbo whistling up more and a louder hissing/wooshing sort of sound. And then when you change gears the recirculater valve will be noticeably louder.

[splash_uk]

the best air intake i use to use for my focus was a RIPSPEED Universal Air Induction System, Its cheaper then the high branded systems but use the same componants and as a green cotten on but with would the coloured filter.

you can get them off eBay for less then $50 USD(40 euros)

hope that helps

[jtaylor2005]

How would you fit one of those as the maf is mounted in the top of the air filter box on these cars.

[Paramanic]

Don't think you can but the mountune one is £300 expensive

but there's another one that's £190 http://www.autospecialists.co.uk/AS-Performance-10-Eco-Boost-100ps-and-125ps---free-flowing-induction-kit-Product-1245.html

Both have the area for sensor

And cheaper ones on pumaspeed at £146

http://www.pumaspeed.co.uk/product-Pumaspeed-10-EcoBoost-Fiesta-Air-Filter_16631.jsp

The last one a think holds the sensor but double check all quite expensive but it's mostly to hold the sensor is the issue

[Willy]

If you want more noise and less power get an open cone :p

[Paramanic]

Haha few months down the line and ur car is a full Hoover! Haha