Found some red pin-striping in the garage left over from when I had my track bike and thought I'd try a quick styling change at the front of the ST.

Only took me 10 mins and that was in the dark, 1-handed juggling roll of striping and a torch. Got a few ripples on the inside of the curves but they've gone now :)

Not certain what I think of it - the red is a bit brighter than the inlay on the ST badge, got some silver to try from Halfords then found the stuff I also had left over off the bike and tried a comparison between the 2. Maybe needs the lower grille doing too but then again it could be overkill.

And got some Blue on it's way to dabble with as well.

Opinions?

I like the red.

Very Golf GTI :)

Nice in red sets it off just right subtle

Looks epic

Looks very good. The red that is

Thanks for the feedback :)

Looks like red is winning so far then, I did think Golf gti when I first put it on. Can peel the silver section off easy enough, may see what the blue looks like or maybe just see if there's any that's slightly darker red.

Keep it red, it makes the st badge stand out

nice cheap cool mod bud

nice cheap cool mod bud

Apart from spending around £15 on pinstriping I'm not going to end up using

Well not really it wouldn't go to waste as you could come an do mine lol

Nice mate I might do something similar :)

Well not really it wouldn't go to waste as you could come an do mine lol

I've got the calculator out to work out if the business case pays once I add in the fuel bill :p