leeandstaz Posted July 16, 2009 Share Posted July 16, 2009 Hi, I have a fiesta Zetec 1.25 1999 (T reg) And the head gasket has gone, I have sent the head off for skimming ect, Head bolts, new head gasket set at the ready And i have the tourqe wrench and the degree disc at the ready Just one thing thats holding me up! Would someone one here have the cylinder head tourqe settings and the sequence in which it should be tightend? Also the tourqe settings and sequence for the cam caps would also help me. ;) Many thanks in advance Guys. Quote Link to comment Share on other sites More sharing options...
stef123 Posted July 17, 2009 Share Posted July 17, 2009 Hi, I have a fiesta Zetec 1.25 1999 (T reg) And the head gasket has gone, I have sent the head off for skimming ect, Head bolts, new head gasket set at the ready And i have the tourqe wrench and the degree disc at the ready Just one thing thats holding me up! Would someone one here have the cylinder head tourqe settings and the sequence in which it should be tightend? Also the tourqe settings and sequence for the cam caps would also help me. ;) Many thanks in advance Guys. the sequence is as follows... 8 - 6 - 1 - 3 - 9 10-4 - 2 - 5 - 7 STAGE 1: tighten to 15Nm STAGE 2: tighten to 30Nm STAGE 3: tighten 90 degrees the camshaft carrier/capa are tightened to 15Nm. hope this helps stef Quote Link to comment Share on other sites More sharing options...
leeandstaz Posted July 17, 2009 Author Share Posted July 17, 2009 the sequence is as follows...8 - 6 - 1 - 3 - 9 10-4 - 2 - 5 - 7 STAGE 1: tighten to 15Nm STAGE 2: tighten to 30Nm STAGE 3: tighten 90 degrees the camshaft carrier/capa are tightened to 15Nm. hope this helps stef Does the cam caps need tightening in any specific order??? Quote Link to comment Share on other sites More sharing options...
stef123 Posted July 17, 2009 Share Posted July 17, 2009 Does the cam caps need tightening in any specific order??? autodata doesnt state if it does or not but i would probably start at the flywheel end and work towards the camshaft pulley. i have a couple of haynes manuals kicking about so i will see if i can find out though Quote Link to comment Share on other sites More sharing options...
leeandstaz Posted July 17, 2009 Author Share Posted July 17, 2009 autodata doesnt state if it does or not but i would probably start at the flywheel end and work towards the camshaft pulley. Ok, Cheers. Ill do that and do it incresements of 5 nm so there is no pressure point on the cam at any one time. Cheers. What about the torque settings for the cam bolts? Do they have that? Cheers again. Quote Link to comment Share on other sites More sharing options...
James mc Posted April 5, 2020 Share Posted April 5, 2020 Hi I have a fiesta mk6 1.25 lx petrol does anyone knw how tight the head bolt got to be cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.