De-Badge 'focus' And 'zetec 1.6'?

[JordFocus]

Was wondering people's thoughts on removing the rear model badges? Anyone done it? Does it looks good? Thoughts appreciated!

Sent from my iPhone using Ford OC

[Brigante]

i did it

looks a lot cleaner and easy enough to do

[artscot79]

Done also though I put the zetec back on kept the focus off

[tomo91]

Done mine a month or so ago, got rid of the focus and zetec and kept the 'S' just wish I had done it as soon as I got the car which was nearly 2 years ago haha! Looks so much better and cleaner in my opinion

Sent from my iPhone using Ford OC mobile app

[Goodkat]

My focus badge is looking scabby so I was debating replacing it, I don't normally debadge but I must say I am considering it

Sent from my Gen 1 WAP phone

[JC600]

I quite like the badges, I would remove the 1.6 though. I brought new ones to replace knackered ones. :)

[Jon Bhoy]

Totally debadged mine (apart from Ford badge on boot) . First time i did it and am very pleased . Sometimes think about putting the "S" badge back on then think nah.Like the stealthy look . Also as a debadge virgin i checked lots of vids etc to make sure i did not mess up the paintwork . Some vids worried me,some made me think i needed to get specialist scrapers and some worried me i would scratch the paint or be left with adhesive lettering.

Quick blast of a hair dryer , some cheap dental floss behind the letters and they pop off nicely.Peel off as much of the residue as possible then just rub away with some sticky stuff remover . Just buy the cheapest of all the products and itll come off nicely . I had no outlines or lettering watermarks but if you do then a bit of T cut will finish it off. Then next wash of the car give the boot a good waxing. Hope that helps,or helps anyone wanting to do it.I was nervous but was very pleased with the results . Whole boot done in 30 mins.

Cheers,

Jon