supercmaxer Posted March 23, 2015 Share Posted March 23, 2015 How easy or hard is it to change the rear wheel bearing on a focus c max? Quote Link to comment Share on other sites More sharing options...
Pink Panther Posted March 23, 2015 Share Posted March 23, 2015 Easy job, its not a press job on them, worst case scenario you will need a small amount of heat Quote Link to comment Share on other sites More sharing options...
supercmaxer Posted March 23, 2015 Author Share Posted March 23, 2015 Easy job, its not a press job on them, worst case scenario you will need a small amount of heat Is the bearing already in the hub not like the fronts were it has to be pressed? I've seen videos and it does look easy lol. Wheel off, caliper off, remove large bolt in middle, remove torx screws and pull? Quote Link to comment Share on other sites More sharing options...
iantt Posted March 23, 2015 Share Posted March 23, 2015 It is easy enough, caliper off, 4 torx bolts abs sensor unplugged and give hub a tap and its out, only difficult bit sometimes is thebtorx bolts can be tight to release, tap the torx socket on so its fully in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.