Omendata Posted October 11, 2016 Share Posted October 11, 2016 Want to remove the headlights to polish them up on the bench to remove the fogging from the plastic and take out some borken glass from an exploded bulb. Have removed the top bolt and the protection round the wheel arches to get access but i cant see any other bolts - is this going to have to be a bumper removal job and ramp job just to get the headlamp out? Quote Link to comment Share on other sites More sharing options...
Omendata Posted October 11, 2016 Author Share Posted October 11, 2016 3 screws? Quote Link to comment Share on other sites More sharing options...
Omendata Posted October 18, 2016 Author Share Posted October 18, 2016 Headlamp Assembly — 1.6L (321150) Removal 1. Raise the vehicle. For additional information, refer to «Section 100-02». µ 2. Remove the wheelhouse trim panel front bolts. µ 3. Remove the wheelhouse trim panel rear bolts. µ 4. Remove the wheelhouse trim panel. µ 5. Detach the fender from the sill panel. µ 6. Remove the fender front clamp bolt. µ 7. Remove the fender rear clamp bolt. µ 8. Remove the headlamp lower screw. 9. Lower the vehicle. µ 10. Detach the bumper from the radiator grille opening panel. µ 11. Detach the fender from the wheelhouse. µ 12. Pull the bumper towards the front secure it to one side. µ 13. Remove the headlamp upper screws. µ 14. Disconnect the turn signal connector. µ 15. Remove the headlamp assembly. l Disconnect the headlamp connector. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.