Niickm93 Posted October 12, 2016 Share Posted October 12, 2016 Hi I've got myself some team heko wind deflectors but I'm struggling to fit the clips in, and when I do the window won't shut, has anyone else had this problem? thanks Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted October 12, 2016 Share Posted October 12, 2016 Push the clips into place with a wide blade screwdriver or ice scraper. Tbh, I removed the clips from mine after a couple of weeks as they were allowing wind and water past the seals and making a terrible whistling noise at speed. If you fit without clips and leave the windows closed as long as possible after fitting to put pressure on the tape then it holds perfectly well without clips. Sent from my SM-G930F 1 Quote Link to comment Share on other sites More sharing options...
Niickm93 Posted October 13, 2016 Author Share Posted October 13, 2016 Thanks will give that a try 1 Quote Link to comment Share on other sites More sharing options...
Cookie30196992 Posted October 13, 2016 Share Posted October 13, 2016 I had this problem what I did was pull the deflectors away from the window and then they shut have to do it about once a month Sent from my SM-G901F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
SuperOwls Posted October 19, 2016 Share Posted October 19, 2016 Hi mate, I had the exact same problem, but all sorted now. You need to push the clips into the top corners on the VERTICAL side of the rubbers, not along the top of the strip, when I fitted mine I couldn't get them to push in far enough on the top and window kept bouncing back down, then put the clips in the sides right at the top and they pushed right in, left them overnight and no problem since 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.