Jump to content
Do Not Sell My Personal Information

What Is A Focus 2.5


Devonboy
 Share

Recommended Posts

Please forgive my ignorance but what is a Focus 2.5

My neighbour insists it's a 2.5 litre,

A response would help so I can continue my life in relative peace.

  • Like 2
Link to comment
Share on other sites


after  the mk 2  was built a few years in to that production run the cars were given a face lift and this was know as the 2.5 facelift:smile:

  • Like 2
Link to comment
Share on other sites

Please forgive my ignorance but what is a Focus 2.5

My neighbour insists it's a 2.5 litre,

A response would help so I can continue my life in relative peace.

Here is a mk2 , which was built from 2005-2007.

6ddf5fab1fc0106c4489ad04a64aed5f.jpg

This is a mk2.5 or also known as mk2 facelift. Which has revised body better interior trim etc.but mechanically more or less same. Built from 2008(08)- 2011 (60).

d39061785d70e45410e448394d402fc2.jpg

See differences both in pics .

Yunii

Sent from my SM-G925F using Tapatalk

  • Like 1
Link to comment
Share on other sites

Yes there is a 2.5Ltr focus. They are the Focus MK2 ST and the Focus RS and they are both real beats, the confusing part is that there is a variant to the MK2 Focus  MK2 preface lift and a face lift MK2  2.5  its the way it looks  outside and has an updated interior and .They both have the 2.5 ltr Duratec engine that has five cylinders the ST  in standard form is 225BHP as it comes from the factory The RS has 300 BHP from the factory. They are easy to MOD with very good gains for simple MODs for example my ST is 340BHP but did cost a bit to get it there but in standard trim its easy to get an extra 50bhp by a simple remap without doing anything else so it would then be 275BHP .The RS is a different beast with a slightly different engine( much stronger made from factoryHas forged pistons and grafite lined liners among other things  And can be moded to well I've seen on the internet 4200BHP and a lot more on some. The easy way to tell them is that they have two exhaust tips sticking out the back apart from the ST or RS badges and the fact that a moded one will pop/bang and crackle  loudly from the exhaust.

Link to comment
Share on other sites

Thanks to all for the info.

"RS", That brings back memories of a 1968 Ford Escort, life was easier then, when a pint of BP Visco Static oil cost 1/9p and a oil filter for 2/5p. a gallon of BP Super was 6/2½p old money of course

  • Like 1
Link to comment
Share on other sites


It's a Volvo engine that likes to crack cylinder liners... :biggrin:

It's also pretty low powered for such a large capacity if it's an ST...But it does make up for it with the noise!! :wink:  

  • Like 2
Link to comment
Share on other sites

On 16/01/2017 at 3:14 PM, Gizza11 said:

internet 4200BHP

Wow that is some beast with that type of BHP .:smile:

  • Like 1
Link to comment
Share on other sites

  • 3 months later...
On ‎19‎/‎01‎/‎2017 at 4:31 PM, ace666 said:

Wow that is some beast with that type of BHP .:smile:

Old thread I know sorry that was a typo I meant 420 BHP the biggest power I've seen for a Mk2 is 670 BHP mods done by BD performance. And yes as tom says they can crack liners that's why you have the block mod done  to prevent this although even with this done they can still do this or you can have if you have plenty of money your engine forged..As you can see from my Avatar that's mine having the block mod done

Link to comment
Share on other sites

if you happen to be reading this from a search on the subject, just to confuse you even more, the mk2.5 is often also called the mk3, and the mk3 is often called the mk4, and the 3.5 the mk5.  Not exactly sure why this happens but many of the parts ive ordered for my mk2.5 have come from Germany and for whatever reason they are listed as above.

So if you are buying parts, don't pay too much attention to the "mark x" check the year and ideally the finis number :)

 

 

Link to comment
Share on other sites

can anyone tally this into a table? ie list what each one has or has more of

Link to comment
Share on other sites

The reason that the mk scheme seems muddled is because Ford do not officially subscribe to one.
They purely go bu the uear of the model.
When buying parts, go by year to avoid problems.

Sent from my SM-G930F using Tapatalk

  • Like 3
Link to comment
Share on other sites

ah, well that explains that then, it also explains the wee hybrid cars we have on the road with mk2 front end and mk2.5 on rear etc etc :)

  • Like 1
Link to comment
Share on other sites

do mk2.5 interior bits fit in a mk2?

 

is my 2009 titanium a 2 or 2.5? (1.6 petrol)

Link to comment
Share on other sites

Most parts are interchangeable (some may need minor modifications).
A 2009 would be classed as a mk2.5.

Sent from my SM-G930F using Tapatalk

  • Like 1
Link to comment
Share on other sites

2.5, does your car have similar headlights to mine? there are some differences to the gear inside a Mk2 and 2.5, its pretty minor stuff, so will probably fit, if there was something specific just ask away, structurally, the car is the same thing, mostly cosmetic changes on the outside the biggest most noticeable difference is the front end, headlamps and bonnet are totally different, but the doors look a little different, as do the front wings and rear bumper....spoiler, radio, colour of the buttons on your centre console when you turn the light on, instrument cluster...... an a few other bits :D

 

  • Like 1
Link to comment
Share on other sites


Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership