Sign in to follow this  

Mk2 rear light question

Recommended Posts


After reading the guide on fitting the mk2.5 rear lights to the mk2 I got to thinking how could i make an adaptor loom that would mean plug and play instead of chopping the mk2 loom.

My thoughts lead me to the following parts from a donor mk2.5

Rear lights both sides

Mk2.5 light looms down to the grey connector block

Mk2 light looms again down to the connector block 

Then try and take the mk2 male connector or the mk2 loom and then reattach this to the mk2.5 loom.

Has anyone done this or have any input on the theory behind my thinking .




Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this