Jump to content
Do Not Sell My Personal Information

Supercharged Ford Fiesta MK7


PhilS404
 Share

Recommended Posts

So after owning my Fiesta for 2 1/2 years and doing multiple modifications I thought I better start a build thread on a Ford forum. 

I previously had a thread on the Mightycarmods forum but they had a system crash so that's gone. 

Anyway here goes.

I picked up my 2011 Fiesta Metal in panther Black back in July 2014 :O 

It had 13000 miles and here are some pictures of the day I got it. Also some pics of my old MK6.5 Style 1.2

B4Wxzvc.jpg

KlAPaLY.jpg

HFCAqt0.jpg

iqkyBBU.jpg

qHLO2cx.jpg

jmXOpHR.jpg

 

Link to comment
Share on other sites


Next up some DMB Gel overlays and wind deflectors 

 

v50Xugp.jpg

I8KppPo.jpg

bhS0iyJ.jpg

vB2uXVh.jpg

Link to comment
Share on other sites

Now I set about removing the headlights, I'm really not a fan of chrome so wanted some with black internals. These were on eBay so I snapped them up

uLQyC1U.jpg

qxYr3So.jpg

dmHYhvx.jpg

iA2Mu0U.jpg

 

  • Like 1
Link to comment
Share on other sites

Also fitted some interior footwell LED

dsM4s4z.jpg

CQvStCL.jpg

Sunglasses holder- which was an absolute hell job. I think it was about 30C, it wouldn't fit properly, fibreglass everywhere. Awful. Just awful. 

MQvWOwI.jpg

CLyYAAF.jpg

YBLVB0o.jpg

Next up I replaced the front grill with an Asian grill along with a Mountune short shifter which came in some interesting packaging. 

nLFmP0w.jpg

The short shifter is a really good modification! One of my favourites

0N31TG6.jpg

TcUANXm.jpg

Link to comment
Share on other sites


Next up was detango the lights

muAmMpH.jpg

l4Pcsqb.jpg

I also sprayed the interior handles black, not the best finish

n6ycdtZ.jpg

Q4iHk5y.jpg

Also some eyebrows from TRC

E71wRa5.jpg

DQ9sZM0.jpg

Colour coded mist washers next

Before:

B9EiZji.jpg

After:

dF1shCG.jpg

Car was also lowered on some H&R 35mm springs

K08shLI.jpg

 

  • Like 1
Link to comment
Share on other sites

Mountune boot mat

NAeaKSc.jpg

YZ0N5Lm.jpg

Full milltek exhaust system: 4-1 manifold, decat and catback. I was never happy with the tips as they did not sit very well with the diffuser

k1gRgr0.jpg

Also picked up a gloss black asian grill 

QyyBe9e.jpg

Mountune floor mats and some TRC side skirt extensions (it took me 2 years to get round to fitting those XD) 

1MpH69Q.jpg

McGuard wheels nuts 

Zf2bMYg.jpg

Mountune spoiler extensions arrived! Now discontinued :(

4biFBjA.jpg

aVMBMK8.jpg

Gloss black upper grill and bonnet lip

Before:

iRkk6ik.jpg

After:

WPU35r8.jpg

YLK9Qah.jpg

Armster armrest installed 

D0xvZM3.jpg

 

Link to comment
Share on other sites

Next up I fitted a Mountune catback and MR155 diffuser (also discontinued)

Looks so so much better than before, and I was very lucky to find one.

NoCROsQ.jpg

FwmNH84.jpg

Also a nice polish to rid of some swirls

T1xDwdf.jpg

Had the mountune extensions painted panther black

hL112uE.jpg

v8qL4o7.jpg

 

Link to comment
Share on other sites

Time for some Audio upgrades

M2dxtqf.jpg

Cp3LiEC.jpg

0kDa3b5.jpg

Yes I agree the headunit looks shockingly bad here

  • Like 1
Link to comment
Share on other sites

Oh, and time for some BOOST!!! I have no time for slow cars!

8NnRf2j.jpg

Ne93dEO.jpg

 

  • Like 1
Link to comment
Share on other sites

looking ood fella and like the gloss black touches

Link to comment
Share on other sites

14 hours ago, b4zz said:

looking ood fella and like the gloss black touches

Thanks mate! Yeah much better than the nasty plastic texture.

Link to comment
Share on other sites

New wheels! Team dynamic pro race 3 in gloss Anthracite. I was torn between gloss black and anthracite but deffo made the right choice. Excuse the filthy car

PvMUwFn.jpg

i3DOHpC.jpg

hOStUlV.jpg

QQKKnn1.jpg

Link to comment
Share on other sites

Finally! Car in for supercharger fitting and tuning at OC Motorsport, along with coilovers! 

eyM4tnz.jpg

0362WEN.jpg

Coilovers! Quite low!

vekYzhK.jpg

SZNvC71.jpg

I also dewipered the car and just fitted a bung to fill the gap. 

Link to comment
Share on other sites


That looks quick! Lovely note from the exhaust too, almost like a touring car but better [emoji6] really nice job you are doing there. I'm not a huge fan of the silver bits on the Asian grill but it certainly doesn't ruin it. Bet it handles well on those coilovers


Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Thanks mate. Yeah me neither, they will be getting done gloss anthracite like the wheels at some point. As will the fog covers just need to find the time. 

  • Like 1
Link to comment
Share on other sites

Right time for some colour coding. Painted my front calipers yellow

w5qdEie.jpg

nOKWcEo.jpg

DTQ4w3g.jpg

And I also fitted the ST180 rear beam, along with HEL braided lines. Also needed the ST handbrake cable. All in all it was about £200 including beam, braided lines, handbrake cable and delivery from London! Bargain! 

kxeqbhy.jpg

And of course painted them yellow too

aHr29HT.jpg

 

Link to comment
Share on other sites

Fronts after a few coats. Realised they looked pants in that picture

1wf3MgH.jpg

jr0Ev94.jpg

  • Like 1
Link to comment
Share on other sites

Nice! I need to get around to painting mine red at some point! A simple enough thing to do but makes such a difference.

Link to comment
Share on other sites

54 minutes ago, Danny|92 said:

Nice! I need to get around to painting mine red at some point! A simple enough thing to do but makes such a difference.

It does make such a difference! And it's pretty easy and relaxing haha. 

Link to comment
Share on other sites

32 minutes ago, PhilS404 said:

It does make such a difference! And it's pretty easy and relaxing haha. 

I'm guessing you used a brush to do them (as oppose to spray paint) based on the minimal covering tape used?

Did you just paint straight onto the caliper or was there any preparation before hand other than washing them?

Link to comment
Share on other sites

15 minutes ago, Danny|92 said:

I'm guessing you used a brush to do them (as oppose to spray paint) based on the minimal covering tape used?

Did you just paint straight onto the caliper or was there any preparation before hand other than washing them?

Yeah I just used a brush! 

I just used a toothbrush with water, then a steam cleaner to remove as much grime as possible. Then used some degreaser to rub down the calipers, and then painted them. I bought the paint from a company called brakecaliperspecialists.uk and it comes as a kit kinda thing. 

  • Like 1
Link to comment
Share on other sites

34 minutes ago, PhilS404 said:

Yeah I just used a brush! 

I just used a toothbrush with water, then a steam cleaner to remove as much grime as possible. Then used some degreaser to rub down the calipers, and then painted them. I bought the paint from a company called brakecaliperspecialists.uk and it comes as a kit kinda thing. 

Nice thanks! Sounds simple enough. I'll have to give it a try when I have some spare time and the weather plays ball! 

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...

Forums


News


Membership