ford puma rear bush removal

[marco.da.man]

hello guys i fought id but a little help for rear bush removal

step 1 with rear axel on or off, prize of plasrtic ring either side using flat heade screw driver

step 2 cut out rubber inside using a hacksaw and knock through with mallet

step 3 using hacksaw cut a slit into metal of bush but carefull not going to far as in through rear axel

step 4 using a cold chisel and hammer knock down cut to open up and losen

step 5 this should losen enough to knock rest off bush out

 

hope this helps all