lampard8 Posted April 9, 2017 Share Posted April 9, 2017 Hi, I got some Focus MK2 "upgraded" heater knobs, and I saw some pics on Instagram where someone managed to install them onto the MK6 Fiesta saying it required "minor modifications", but these new knobs have the internal flat part on the left side, while the original ones have the flat part below! Anyone has any advice about how to do it? Thanks! Quote Link to comment Share on other sites More sharing options...
Ian Lanc Posted April 9, 2017 Share Posted April 9, 2017 Could you not re-grind a new flat edge on the steel part ? you'd have to use a Dremel type tool with a small carbon disc fitted to cut the edge. Quote Link to comment Share on other sites More sharing options...
lampard8 Posted April 9, 2017 Author Share Posted April 9, 2017 The metal axle is too much "inside", I would prefer to modify the new knobs! Quote Link to comment Share on other sites More sharing options...
lampard8 Posted April 10, 2017 Author Share Posted April 10, 2017 I am wondering, maybe some "other car" knobs would fit more easily? Quote Link to comment Share on other sites More sharing options...
Galabsnu Posted January 25, 2020 Share Posted January 25, 2020 Did you find a solution? I’m looking at doing the same but all options seem to be for Focus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.