Jump to content
Do Not Sell My Personal Information


St 250 boost solenoid valve


D13 HPD 95
 Share

Recommended Posts


there some sort of instructions at the bottom of the page you put up :smile:Which way around do the pipes go ?

The valve has each port numbered 1 ,2 and  3

Port 1 = Return line ( this goes back into the turbo intake which faces upwards on the start of the Turbo intake)

Port 3 = Presure feed ( this goes to the line that exits normally from the side of the Turbo intake)

Port 2 = Actuator Feed (this line goes directly to the actuator.)

Please be aware that the unit will not work correctly any other way around and could result in serious overboost problems and subsequenet engine damage if not proprly fitted
.If you are in any doubt whatsoever please print this page and take the Pumaspeed uprated solenoid valve to a professional workshop for installation.

 

 

Link to comment
Share on other sites

Dez, i did see that but im more after where is this soleniod valve and which line is which :unsure:

Link to comment
Share on other sites

Has anyone done this mod can help a lad out :) 

Link to comment
Share on other sites

If anyone is interested in this mod the valve is located just on the turbo, its a wheel off wheel arch out and you should be able to get to it 

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership