Carl123 Posted September 27, 2017 Share Posted September 27, 2017 Try this http://uk.rs-online.com/web/p/automotive-connectors/7187176/ Quote Link to comment Share on other sites More sharing options...
jace1969 Posted September 27, 2017 Share Posted September 27, 2017 1 hour ago, Carl123 said: Try this http://uk.rs-online.com/web/p/automotive-connectors/7187176/ Your good,i have been after one of these things for ages as mine has broke. Cheers mate..................just emailed them as i have searched for places like eBay to order a few being cheap. Quote Link to comment Share on other sites More sharing options...
540itouring Posted September 30, 2017 Share Posted September 30, 2017 On 9/23/2017 at 8:50 AM, N.K.D said: it's working now , but the guide line is not show up, the BCm need some data from Ford Genuine camera module!! The genuine camera which I used has a data output / control signal to supply the steering lines and head unit control like ZOOM etc. A cheep camera will only give a picture and may have a option on some for guide lines but will NOT alter with the steering position. The genuine camera is more complex to retrofit but well worth it when finished. Quote Link to comment Share on other sites More sharing options...
ThaiFiesta Posted September 30, 2017 Share Posted September 30, 2017 31 minutes ago, 540itouring said: The genuine camera which I used has a data output / control signal to supply the steering lines and head unit control like ZOOM etc. A cheep camera will only give a picture and may have a option on some for guide lines but will NOT alter with the steering position. The genuine camera is more complex to retrofit but well worth it when finished. I'm keen to replace my dealer fitted mirror based reversing camera with a factory type one. What's the minimum radio configuration I need to make this work? Do you need the SatNav head unit and display or are there lesser versions that work with the factory camera? Thanks Quote Link to comment Share on other sites More sharing options...
Guest Posted October 13, 2017 Share Posted October 13, 2017 On 9/30/2017 at 2:24 PM, 540itouring said: The genuine camera which I used has a data output / control signal to supply the steering lines and head unit control like ZOOM etc. A cheep camera will only give a picture and may have a option on some for guide lines but will NOT alter with the steering position. The genuine camera is more complex to retrofit but well worth it when finished. Hi there, I am in the works of doing the genuine camera install however as im aware there is 6 wires coming off the camera. Where do i need to connect each of these wires? So that i have all the controls to work lines etc. I have a 2016 st-line and this has a green plug already in the back for the camera wire to go into. As i said all im looking for is where each of the wires go from the camera. Thanks. Quote Link to comment Share on other sites More sharing options...
N.K.D Posted October 21, 2017 Share Posted October 21, 2017 On 10/13/2017 at 7:19 AM, rossco5378 said: Hi there, I am in the works of doing the genuine camera install however as im aware there is 6 wires coming off the camera. Where do i need to connect each of these wires? So that i have all the controls to work lines etc. I have a 2016 st-line and this has a green plug already in the back for the camera wire to go into. As i said all im looking for is where each of the wires go from the camera. Thanks. 2 wire supply power 2 line camera signal 1 line goes to BCM C2280G-24 Quote Link to comment Share on other sites More sharing options...
Guest Posted October 22, 2017 Share Posted October 22, 2017 On 10/21/2017 at 2:38 AM, N.K.D said: 2 wire supply power 2 line camera signal 1 line goes to BCM C2280G-24 Hi, Thanks for the info N.K.D, However which pin am i exactly looking for in the bcm is it the one below?, I have followed the data wire from a titanium x with a camera and this seems to where it goes but im just wondering its definitely the correct pin. Cheers, Quote Link to comment Share on other sites More sharing options...
N.K.D Posted October 23, 2017 Share Posted October 23, 2017 14 hours ago, rossco5378 said: Hi, Thanks for the info N.K.D, However which pin am i exactly looking for in the bcm is it the one below?, I have followed the data wire from a titanium x with a camera and this seems to where it goes but im just wondering its definitely the correct pin. Cheers, Yes, it is Quote Link to comment Share on other sites More sharing options...
Almost Posted October 28, 2017 Share Posted October 28, 2017 I've been interested in doing this also. I have a used 2016 zetec that has the sat-nav option with 5" screen. I have a couple of questions if I may. First: Is there any possibility that the loom to the tailgate will have the wiring necessary for the camera already? Second: I know the tailgate trim is different. Can you separate the "different" part from the body coloured part or do you need to get one of the same body colour? Thanks for any help. Quote Link to comment Share on other sites More sharing options...
540itouring Posted October 29, 2017 Share Posted October 29, 2017 23 hours ago, Almost said: I've been interested in doing this also. I have a used 2016 zetec that has the sat-nav option with 5" screen. I have a couple of questions if I may. First: Is there any possibility that the loom to the tailgate will have the wiring necessary for the camera already? Second: I know the tailgate trim is different. Can you separate the "different" part from the body coloured part or do you need to get one of the same body colour? Thanks for any help. you will not have any tailgate wiring for the camera or cables to the front display. I replaced the tailgate trim from another car and had the trim sprayed.. You can not just swap the camera as the camera and the boot release button are not in the same place. I fitted the oem camera and trim in my 2013 titanium x Quote Link to comment Share on other sites More sharing options...
Almost Posted October 30, 2017 Share Posted October 30, 2017 Okay thanks a lot, that's helpful. Do you or anyone else know if circuit diagrams are available anywhere for this car? I know the old Haynes manuals used to have them but there isn't one for the post facelift model yet and I don't know if they still go into such detail as they used to. Thanks again. Quote Link to comment Share on other sites More sharing options...
bigchunk Posted November 12, 2017 Share Posted November 12, 2017 Hi gents, I have the same, genuine camera, all wired and working apart from the lines do not move, I don't have this wire connected and it looks like this is all I need to do to get it working, just wondering if you could tell me the location of the BCM so that when I get back home from working abroad I can get this last wire connected and finally working as oem. Quote Link to comment Share on other sites More sharing options...
bigchunk Posted November 12, 2017 Share Posted November 12, 2017 On 10/23/2017 at 4:50 PM, N.K.D said: On 10/23/2017 at 2:35 AM, rossco5378 said: Hi, Thanks for the info N.K.D, However which pin am i exactly looking for in the bcm is it the one below?, I have followed the data wire from a titanium x with a camera and this seems to where it goes but im just wondering its definitely the correct pin. Cheers, Yes, it is Hi gents, I have the same, genuine camera, all wired and working apart from the lines do not move, I don't have this wire connected and it looks like this is all I need to do to get it working, just wondering if you could tell me the location of the BCM so that when I get back home from working abroad I can get this last wire connected and finally working as oem. Quote Link to comment Share on other sites More sharing options...
Kvist Posted December 1, 2017 Share Posted December 1, 2017 Can anyone tell me wich parameters you need to change in the cc. My original retrofit camera works, after I’ve changed the cc. But the lines and stuff doesn’t. I’ve added the Lin bus wire as described here in this forum but still doesn’t work :( is there more than one parameter you need to change? TIA :) Quote Link to comment Share on other sites More sharing options...
ebay_noob Posted May 29, 2018 Share Posted May 29, 2018 Hi, I see some people are fitting genuine 6pin camera, that is what i'm looking to do as well (pix). Already replaced radio and display with the satnav version and all works great, what remains is the camera to connect, unfortunately my loom does not have the camera connector in place so I need to make one up. Does anyone know the PIN layout and where they connect to on the satnav/radio? Cheers. Quote Link to comment Share on other sites More sharing options...
Cragrat Posted May 29, 2018 Share Posted May 29, 2018 Have a look at the new Haynes manual 6407 this has the wiring diagram for the rear camera. 1 Quote Link to comment Share on other sites More sharing options...
ebay_noob Posted May 29, 2018 Share Posted May 29, 2018 Did not even think those kind of things will be in Haynes any more, thought they only show how to use indicator those days, my last manual was for a Capri which showed torque for cylinder head bolts or how to service oil pump 😀. Got one in delivery now, thank you for advice! Quote Link to comment Share on other sites More sharing options...
phez Posted March 21, 2021 Share Posted March 21, 2021 On 5/29/2018 at 3:01 PM, ebay_noob said: Did not even think those kind of things will be in Haynes any more, thought they only show how to use indicator those days, my last manual was for a Capri which showed torque for cylinder head bolts or how to service oil pump 😀. Got one in delivery now, thank you for advice! Would you mind sharing this information please? I am doing the same, though someone advised it was "BCM C2280G-24" (pin 24) Quote Link to comment Share on other sites More sharing options...
phez Posted March 21, 2021 Share Posted March 21, 2021 On 4/22/2017 at 7:01 AM, JW1982 said: Pin 1 and Pin 2 of the Rosenberger HSD connector are used for the video signal from the rear view camera. Pin 3 and Pin 4 are not used. The type of connector you need is a Rosenberger HSD type E connector. You can also use a Rosenberger HSD type Z connector. Just like the fakra connectors the Rosenberger type Z connector is compatible with all versions of this connector. Could you please advise what the Blue / Black / Pink connectors do ? Are they Fakra as well? Thank you Quote Link to comment Share on other sites More sharing options...
JW1982 Posted March 21, 2021 Share Posted March 21, 2021 Blue = GPS. Black = FM antenna (required for TMC reception). Pink = FM antenna (pass through from FCDIM to ACM). These are regular 2-pole Fakra connectors. 1 Quote Link to comment Share on other sites More sharing options...
Lewie226 Posted March 21, 2021 Share Posted March 21, 2021 That’s correct I’ve done this in my 2015 fiesta the only thing I’m still to do is the voice wires for the nav 1 Quote Link to comment Share on other sites More sharing options...
phez Posted March 21, 2021 Share Posted March 21, 2021 6 hours ago, Lewie226 said: That’s correct I’ve done this in my 2015 fiesta the only thing I’m still to do is the voice wires for the nav Thanks for replying. So that would be the Pink Fakra to which which connection on the ACM? Also did you wire a dedicated FM antenna for Black Fakra on the FCDIM? or did you use some sort a Y-adapter/splitter from the existing Antenna? Also do your reverse steering lines work on the reverse camera? Quote Link to comment Share on other sites More sharing options...
Lewie226 Posted March 22, 2021 Share Posted March 22, 2021 I bought a gps antenna from amazon and the farak patch lead from their too so the black dab lead (from the car) goes into the back of the display ( was in the back of the head unit) then the email to female patch lead I bought goes in the back of the head unit ( dab aerial socket) to the pink socket on the back of the display as for camera - I don’t have one fitted so is unused 2 Quote Link to comment Share on other sites More sharing options...
phez Posted March 22, 2021 Share Posted March 22, 2021 5 hours ago, Lewie226 said: I bought a gps antenna from Amazon and the farak patch lead from their too so the black dab lead (from the car) goes into the back of the display ( was in the back of the head unit) then the email to female patch lead I bought goes in the back of the head unit ( dab aerial socket) to the pink socket on the back of the display as for camera - I don’t have one fitted so is unused Thanks, I have bought the following from Amazon: https://www.amazon.com.au/gp/product/B07BCCGFVG/ https://www.amazon.com.au/gp/product/B07PDP33XL Quote Link to comment Share on other sites More sharing options...
Lewie226 Posted March 22, 2021 Share Posted March 22, 2021 Look very similar to mine but from amazon UK 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.