Jump to content
Do Not Sell My Personal Information


Adjusting rear washer jet


MJNewton
 Share

Recommended Posts

Before I go and break something can anyone if the aim of the rear washer jet on the Mk 7.5 Fiesta is adjustable (or not)? Many jets of this type can be aimed with the aid of a pin or similar to move the position of the hole but I'm not sure that this is the case here. 

Link to comment
Share on other sites


I'm not sure about the Fiesta but the Mondeo is preset in the factory and cannot be moved. - or so they say. I manipulated mine with a pin and it went from one extreme to the other. If you have a poor coverage then try gently with a pin. If that doesn't work go back and get it checked


Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Thanks Jon. I had another look today and I think it's definitely a fixed position on the Fiesta. Given all my poking around I may well have inadvertently removed a small blockage though as whilst its aim is still right at the top of the screen (I was hoping I could move it lower down) it does seem to be giving a more substantial soaking so it is probably good enough as-is.

  • Like 1
Link to comment
Share on other sites

Mine just runs down the window not a jet/spray and also don't want to mess as i might snap something.

Link to comment
Share on other sites

Mine just runs down the window not a jet/spray and also don't want to mess as i might snap something.

Just gently push a fine needle or the end of a wire paperclip into the nozzle, as long as you go in straight it will be fine. Don't force or try to wiggle it though. A drawing pin or nail would be too thick, it must be something fine.


Sent from my iPad using Tapatalk
Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership