Jump to content
Do Not Sell My Personal Information


Reverse camera, sony nav retrofit


N.K.D
 Share

Recommended Posts

I have 5 inch mfd low and non OEM reverse camera. I've conneted video signal to green connector of screen, and config to MFD 5". The reverse camera work fine but when i change from gear R to N, D, the screen stuck in black for a while (30s). The button zoom, turning line.. are not work! Can you send the wirring that you've done?

The camera connector has 4 pin, i just use pin 1 and 2. What's pin 3 and 4??

The screen connector has 3 pin are not using, what'll connect to??

Thank you!

Here the video

 

 

Link to comment
Share on other sites


I think your find your problem is the fact that your camera is being powered from your reverse light ?????  This must be a constant 12 volt supply all the time the ignition is ON. 

The genuine camera uses a always live 12 volt supply. The system should show the camera after you come out of reverse gear and so if you have taken the power from the reverse lamp that will be your problem

 

  • Like 1
Link to comment
Share on other sites

You will not get the turning line to work on your camera simply because it is not a genuine ford camera .

  • Like 1
Link to comment
Share on other sites

Thanks so much. I will find a solution with this camera!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership