N.K.D Posted August 16, 2017 Share Posted August 16, 2017 I have 5 inch mfd low and non OEM reverse camera. I've conneted video signal to green connector of screen, and config to MFD 5". The reverse camera work fine but when i change from gear R to N, D, the screen stuck in black for a while (30s). The button zoom, turning line.. are not work! Can you send the wirring that you've done? The camera connector has 4 pin, i just use pin 1 and 2. What's pin 3 and 4?? The screen connector has 3 pin are not using, what'll connect to?? Thank you! Here the video Quote Link to comment Share on other sites More sharing options...
540itouring Posted August 16, 2017 Share Posted August 16, 2017 I think your find your problem is the fact that your camera is being powered from your reverse light ????? This must be a constant 12 volt supply all the time the ignition is ON. The genuine camera uses a always live 12 volt supply. The system should show the camera after you come out of reverse gear and so if you have taken the power from the reverse lamp that will be your problem 1 Quote Link to comment Share on other sites More sharing options...
540itouring Posted August 16, 2017 Share Posted August 16, 2017 You will not get the turning line to work on your camera simply because it is not a genuine ford camera . 1 Quote Link to comment Share on other sites More sharing options...
N.K.D Posted August 17, 2017 Author Share Posted August 17, 2017 Thanks so much. I will find a solution with this camera! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.