zain611 Posted August 2, 2018 Author Share Posted August 2, 2018 Things have been halted for a bit as my room is getting refurbished. Dad had this underseat sub lieing around so might install this when my room is done. Today found the remote for it so have to see if it works. Also need to get the front calipers sprayed gloss black to match the rear. 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted September 9, 2018 Share Posted September 9, 2018 Things have been halted for a bit as my room is getting refurbished. Dad had this underseat sub lieing around so might install this when my room is done. Today found the remote for it so have to see if it works. Also need to get the front calipers sprayed gloss black to match the rear. I have the Alpine underseat sub.but i also fitted fusion component Speakers with tweeters . I used low level rca output converter using my sony 6cd dab headunit.The sound is awesome even at low level sound.YuniiSent from my SM-G925F using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
yunii Posted September 9, 2018 Share Posted September 9, 2018 Fusion components.Sent from my SM-G925F using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted September 10, 2018 Author Share Posted September 10, 2018 I remember seeing those in your build topic. Look good 👍. Funny thing is I don't think the mk6 fiestas have tweeters. My gran had a mk5 fiesta and that had separate tweeters. If I was going to change the Speakers I'd probably go with kenwood and probably get the Sony headunit. I've just been busy with my room. Hopefully near the end of finishing the bits needed before waiting for the carpet and bed to come. I'm also going on holiday next week so no time at all for the car 🤣 Quote Link to comment Share on other sites More sharing options...
zain611 Posted October 26, 2018 Author Share Posted October 26, 2018 Something little but found a Ford sticker in the garage to put on the key 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted November 24, 2018 Author Share Posted November 24, 2018 Ordered these switchback fogs from autobeam. They are doing a black Friday deal and managed to get them at a steal price. They increased the price from £35 to £40 but I had it in the basket back when it was on sale for £30 so managed to get it for £32 (taxes and shipping plus the black Friday discount code added). Would of been around £37 if I bought it at the increased price and added the discount code. 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted November 28, 2018 Author Share Posted November 28, 2018 bulbs arrived. Quickly tested one and looks nice. Couldn't have a good look as the Weather was forcing me to go indoors. So comes on white when first turned on then yellow when turned off and on then looks to be a warm white after switching it off and on again. The halos kind of get in the way but hopefully the light can shine out onto the road. 1 Quote Link to comment Share on other sites More sharing options...
STJAY Posted November 28, 2018 Share Posted November 28, 2018 Very nice mate, lovely wee yolk 2 Quote Link to comment Share on other sites More sharing options...
b4zz Posted November 28, 2018 Share Posted November 28, 2018 will be waiting for the pics once you get to test the bulbs on a dry day 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted November 28, 2018 Author Share Posted November 28, 2018 2 hours ago, STJAY said: Very nice mate, lovely wee yolk 1 hour ago, b4zz said: will be waiting for the pics once you get to test the bulbs on a dry day I think it might be a little difficult getting pictures as the camera might not be able to pick up the fog light behind the halo rings but will adjust the exposure to see if it helps. Will arrange a day to put the car in the garage to fit the bulbs in and also to grease the petrol filler cap as its becoming too stiff to open with the key. Also need to do a service but not too worried due to my short mileage 😂. Will have to change the auxiliary belt and later the front driver side tire as that came up in the MOT as near the legal limit. Have to resist the odd wheel spinning at the moment 🤣. Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 3, 2018 Author Share Posted December 3, 2018 So put the car in the garage today to fit the fogs in. Sadly the fan unit makes the bulb stick out that much that it's touching the AC pump so cannot screw in fog lens. Did get some good pictures. Bulb I was going to install Began removing the fog light cover, lens then bulb. Halogen vs LED Tested the bulb and these are the light colours. You switch them by turning the lights off and on. Looks to be 6500k, 3000k and a warm white (say about 4000k). Looks like the AC pump is getting in the way. After that disappointment I thought might clean up the interior. Also managed to lube the fuel filler cap lock as it became difficult to open. Thankfully that now opens with ease 🙂 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted December 5, 2018 Share Posted December 5, 2018 look like the interior came up well 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 5, 2018 Author Share Posted December 5, 2018 2 hours ago, b4zz said: look like the interior came up well Thanks b4zz, just a shame about the LED Bulbs that they couldn't fit in. Quote Link to comment Share on other sites More sharing options...
b4zz Posted December 6, 2018 Share Posted December 6, 2018 21 hours ago, zain611 said: Thanks b4zz, just a shame about the LED bulbs that they couldn't fit in. bet you were gutted as they would have been nice. Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 6, 2018 Author Share Posted December 6, 2018 9 hours ago, b4zz said: bet you were gutted as they would have been nice. Yeah might not touch the fogs now however later on might get the performance indicators again to put on the front. Quote Link to comment Share on other sites More sharing options...
Lenny Posted December 7, 2018 Share Posted December 7, 2018 14 hours ago, zain611 said: Yeah might not touch the fogs now however later on might get the performance indicators again to put on the front. There's different designs of those bulbs available. Some have metal braided tape for heat sink on the back instead of an aluminium Spanish onion, The tape will fold very easy See here: https://www.amazon.com/Runmade-Headlight-3-Mode-Switchback-9600LM/dp/B07C7T1HNV/ref=mp_s_a_1_12?ie=UTF8&qid=1544171647&sr=8-12&pi=AC_SX236_SY340_QL65&keywords=h11+switchback Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 7, 2018 Author Share Posted December 7, 2018 Thanks @Lenny yeah I've seen those types of bulbs with the copper braiding. It's the Spanish onion design on mine which makes it too long to not fit in as the bottom is touching that metal part. If it did just fit in then I'm not sure if the heat might go onto that part. 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted December 7, 2018 Share Posted December 7, 2018 10 minutes ago, zain611 said: Thanks @Lenny yeah I've seen those types of bulbs with the copper braiding. It's the Spanish onion design on mine which makes it too long to not fit in as the bottom is touching that metal part. If it did just fit in then I'm not sure if the heat might go onto that part. I reckon the alluminium or copper would disperse the heat quite efficiently even while being in contact with the A/C housing as there alloy structure is a higher conductor of heat, If the tape ones fit then there an alternative option. 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 29, 2018 Author Share Posted December 29, 2018 Got the service bits which is 3 months overdue. Hopefully next week will get it done. Also bought the fan belt to change as the current one looks to be fraid. So Bosch aero wipers, Bosch rear wiper, oil filter, diesel filter, air filter and cabin filter. 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 30, 2018 Author Share Posted December 30, 2018 So managed to get the service done today. Changed the bits I got yesterday. Air filter was dirty and that's after little mileage Changed the fan belt and happy that was done. The old one was fraid and there was one bit with a deep cut. New matte one in Looked in the engine and there was a small bit of diesel around the injectors which worried me. Two looked to have a little on the inlet pipe so managed to tighten them a little more. I hear the bolts loosen over time so best to check and two were able to move. After that started fitting the sub in. Will get onto that when it's done. 2 Quote Link to comment Share on other sites More sharing options...
Jonro2009 Posted December 31, 2018 Share Posted December 31, 2018 Thought this might go down well in this thread@Zain611 @Lenny Sent from my iPad using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted December 31, 2018 Author Share Posted December 31, 2018 @Jonro2009 yes I've seen that 🤣. Tempts me but don't plan on getting anything after a bit after buying those fog lights. At the moment wiring in the sub. Need to see when me and dad will have time to continue it. Radio is out the car at the moment also. Happy New year to everyone 🎉🎊 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted December 31, 2018 Share Posted December 31, 2018 5 minutes ago, Jonro2009 said: Thought this might go down well in this thread@Zain611 @Lenny Playing a Blinder 😅 I've just bought the cheapest pair of H7 from Halfords for €9 then they wanted €5 per bulb to fit 😂 no thanks I'll assume that position myself €10 to fit two bulbs which cost €9 Quote Link to comment Share on other sites More sharing options...
zain611 Posted January 6, 2019 Author Share Posted January 6, 2019 Yesterday fitted the underseat sub in the car. Looked at the wiring diagram for the stereo to wire it into the speaker output and the Ford mondeo uses the same one. This sub was fitted in my dad's previous car but couldn't fit it in his current car as there's no space under the seat. The remote wasn't working at first but luckily got it working by removing the plugs which connects the wires and wiring it together. Tested it and it vibrates the inside including the driver seats🤣. 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted January 7, 2019 Author Share Posted January 7, 2019 This is the switch wired and placed for the dashcam. Still looking clean after washing it 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.