Boomlander Posted December 26, 2017 Share Posted December 26, 2017 Hi All, New to the club and sorry if this has already been covered. The top glovebox lid on my Fusion seems to be covered in a rubbery non slip coating which is badly marked and scratched and I was wondering if anyone has found a simple way of renovating it. The box itself does not want to come out easily - is there a knack to removing it ? Thanks for any advice. Quote Link to comment Share on other sites More sharing options...
Jethro_Tull Posted December 26, 2017 Share Posted December 26, 2017 I've had just this problem. Undo the two screws, and use two cutlery knife blades to carefully lever it out from the front. The rubber coating comes off quite easily, 400 grit wet and dry and soapy water will have every last scrap removed. Give it a rub with 600 grit to tidy it up, then a few coats of spray bumper paint have it looking like new. Quote Link to comment Share on other sites More sharing options...
Boomlander Posted December 26, 2017 Author Share Posted December 26, 2017 Thank you so much for the excellent advice.............Even better from another Tull enthusiast! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.