ST180 Exhaust on 1.0L T black edition

[Dharrison1496]

Morning all!

 

Just a quick one here,

I have a full st180 exhaust from cat back in the workshop here and I was wondering If the full thing would fit on my 1.0l black edition?

I have purchased the necessary 45 to 55mm connecting sleeve in the case that I need to cut anywhere but if it would fit straight on without hassle I'd rather venture down that route!

Looking at the flange from the cat down to the rest of the exhaust, it seems that they are exact same size on the 1.0 and st180 exhaust? I haven't measured the one on my 1.0 yet as I haven't disconnected the exhaust.

The flange measurements for the St180 exhaust are as follows12.5cm width (whole flange left to right) and 7.5cm from up to down. and the internam measurements are 5.7cm by 5.7 cm.

If anyone has dimensions on the 1.0l that would be great! Looking to swap the exhaust in the next 2 hours.

 

thanks for help in advance!

Edited January 13, 2018 by Dharrison1496

[Eatonm112]

On 1/13/2018 at 11:07 AM, Dharrison1496 said:

Morning all!

 

Just a quick one here,

I have a full st180 exhaust from cat back in the workshop here and I was wondering If the full thing would fit on my 1.0l black edition?

I have purchased the necessary 45 to 55mm connecting sleeve in the case that I need to cut anywhere but if it would fit straight on without hassle I'd rather venture down that route!

Looking at the flange from the cat down to the rest of the exhaust, it seems that they are exact same size on the 1.0 and st180 exhaust? I haven't measured the one on my 1.0 yet as I haven't disconnected the exhaust.

The flange measurements for the St180 exhaust are as follows12.5cm width (whole flange left to right) and 7.5cm from up to down. and the internam measurements are 5.7cm by 5.7 cm.

If anyone has dimensions on the 1.0l that would be great! Looking to swap the exhaust in the next 2 hours.

 

thanks for help in advance!

Hi 

 

The only part that different is the bore of the pipe on the ST.

Just measured my own down pipe to exhaust flange as I changed it yesterday and it measures 12.6 across the width and 7.6 up and down with the pipe bore being 4.6cm..

 

Best of luck.