Dave Holland Posted January 14, 2018 Share Posted January 14, 2018 Hello All Just bought a 2012 Titanium X Sport 2.2 TDCI after spending a while looking for the right one. Other than an EML pointing to a few DPF related issues (differential pressure sensor, soot build up etc.) in the first week which the dealer sorted, I've got nothing but praise for the car. I had a few questions about potential light modifications to the car which I'm hoping someone will be able to help with: 1. Replacing the halogen rear number plate lights for LEDs (car has LED DRLs and xenons at the front, the yellowy tinge from the number plate lights spoils it in my eyes). Is there a factory fit/OEM module to replace the halogen bulb carrier/housing, or is just better to replace the bulb with an LED one? I know from past experience if the resistance of the new bulb/diode isn't correct I'll get a bulb out warning. 2. Retrofitting a genuine Ford Nav unit - I've done this before with VAG cars, not sure how easy this is to do with a Ford? I do not have access to any Ford specific diagnostic software and I'm assuming this will definitely be required? Sourcing the unit, adding in the extra loom etc. won't be an issue (unless it's prohibitively complex to do for the DIY mechanic) One other minor fix which is required is that the driver's side xenon washer sticks in the up position and can sometimes take up to a minute to come down, after popping up to wash the headlights. Is this a vacuum system or is it mechanical? Thanks very much in advance for any help. Dave Quote Link to comment Share on other sites More sharing options...
FatHead1979 Posted January 17, 2018 Share Posted January 17, 2018 No sure if the MK4 Mondy has the rear plate light(s) on a CANBUS system, I know that on many of Ford's older model such as my MK2 Focus I seem to be able to fit whatever bulbs I want without any flickering as the rear plate lights aren't on a CANBUS. I might end up with a MK4 Mondy one day so I'd also be curious to know which (if any) exterior lights on the MK4 Mondy are on a CANBUS). Quote Link to comment Share on other sites More sharing options...
Dave Holland Posted February 13, 2018 Author Share Posted February 13, 2018 Thanks Damian - helpful advice Dave 1 Quote Link to comment Share on other sites More sharing options...
FatHead1979 Posted February 13, 2018 Share Posted February 13, 2018 3 hours ago, Dave Holland said: Thanks Damian - helpful advice Dave No worries mate, just found this thread over at TalkFord http://www.talkford.com/community/topic/216195-led-number-plate-light/ one of the suggestions to see if a bulb is monitored by the canbus is remove the bulb, turn on the exterior lights and if no error light comes up on the dash you should be safe, or so the theory goes. Quote Link to comment Share on other sites More sharing options...
Frembrit Posted February 13, 2018 Share Posted February 13, 2018 Worth changing the puddle light bulbs too for LED's. I bought canbus type from an eBay seller. 1 Quote Link to comment Share on other sites More sharing options...
mikesmith2939 Posted February 20, 2018 Share Posted February 20, 2018 I fitted a direct replacement LED panel in place of the puddle lights. This is the amount of extra light they produce and it isn't fully dark yet 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.