Outtheway

So change of plan regarding the jag seats. I have got a set of mk3 mondeo st seats to use but the runners and the base don't line up, would I be able to use steel plate bolted to base and then runners bolted to plate, I done a mock up with ply to see if it would work and for a size comparison. What size of plate would need to be used, cheers Paul Sent from my SM-G960F using Tapatalk

Alright folks looking for some advice. I was out to get alternative seats for the transit and came across jag xtype seats, would these be an easy fit without too much modification, I don't weld and not got too many tools so I'm a bit limited to what I can do, any help would be grateful cheers Paul Sent from my SM-G960F using Tapatalk

Hi folks looking for some help/advice, I have a 2010 Transit lwb, I fitted a split charge relay and also a leisure battery. Yesterday I fitted a 160w solar panel and solar charge controller. On my way into work this morning I noticed my battery light was on, any ideas why? It hasn't came on before I fitted the solar. Cheers Paul Sent from my SM-G960F using Tapatalk

Hi folks recently got a 2010 Transit crew van and planning to turn into a camper. After removing panels in rear and starting to do the insulation I found a wee plug tucked up in front of the right side wheel arch. I thought it could be a speaker wire so started following back to where I would want speakers. When following the loom I came across another plug with 3 wires, any help would be great Cheers Paul Sent from my SM-G960F using Tapatalk