selwynha

Budding Enthusiast
  • Content Count

    12
  • Joined

  • Last visited

About selwynha

  • Rank
    Member

Profile Information

  • First Name
    Selwyn
  • Ford Model
    Fusion
  • Ford Year
    2003
  • UK/Ireland Location
    Cheshire

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks for your help Paul, I'll have a look and try the same. The securing collar appears loose on mine too 😞
  2. Thanks Paul, I've heard that the wiring at the door hinges can break with age inside the rubber boot. I'm struggling to identify the correct cables and if they are all black as you say it will be even more 'interesting' 😞
  3. Thanks for that, yes it's second hand from a breakers yard so could be faulty 😞
  4. Hi all Fitted second hand door locking solenoid to 2003 1.4tdi and it locks really positively but won't open using the remote key - have to open it manually 😞 Is anyone aware of a wiring diagram or test procedure for the door solenoids? Many thanks
  5. Thanks for the reply, the previous lock solenoid was locking fine but struggling intermittently to open, so basically working better than the replacement I've used which doesn't unlock at all. Perhaps the wiring was on the way out and it's now completely broken when I changed the solenoid which did entail disconnecting the door plug - you may be onto something there. I'll go and check the wiring out. It would be nice to see a wiring diagram so that I know which single wire to check and repair. Thanks again
  6. Hi all Fitted second hand door locking solenoid to 2003 1.4tdi and it locks really positively but won't open using the remote key - have to open it manually 😞 Is anyone aware of a wiring diagram or test procedure for the door solenoids? Many thanks
  7. Looks like the clutch is slipping at 70,000 miles on my 2003 Fusion 1.4 TDI. Should I be changing the dual mass flywheel as a matter of course? 70,000 miles doesn't seem a lot? Thanks
  8. 2003 Ford Fusion Hi all, has anyone come across a guide to removing the front doors inner card to access the door locking solenoid? I've removed the outer card only to be presented with the inner card which has the window motor on it. Many thanks
  9. 2003 Ford Fusion Hi all, has anyone come across a guide to removing the front doors inner card to access the door locking solenoid? I've removed the outer card only to be presented with the inner card which has the window motor on it. Many thanks
  10. SOLVED! Although caliper slider pins were clean and lightly lubed, the rubber gaiters were very dry and 'sticky' internally. Cleaned out and lubed - no more noise!
  11. Hi everyone, 2003 tdci getting random 'clicking' noise from front wheel area. Noise disappears for a time when brake pedal gently applied. Ok for a while, then reappears. Any suggestions greatly appreciated as all looks well around the calipers.
  12. Hi everyone, Ford Fusion 2003 tdci getting random 'clicking' noise from front wheel area. Noise disappears for a time when brake pedal gently applied. Ok for a while, then reappears. Any suggestions greatly appreciated as all looks well around the calipers.