Jump to content
Do Not Sell My Personal Information


Andrei28

Budding Enthusiast
  • Posts

    5
  • Joined

  • Last visited

Profile Information

  • First Name
    Andrei
  • Ford Model
    Ford Fiesta
  • Ford Year
    2014
  • UK/Ireland Location
    Greater London

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Andrei28's Achievements

  1. Hello! I have mounted the OEM camera to my Fiesta, I found some details from some people on a Dutch forum I think. For your info, I used a 2 wires cable with shiled (used for microphones) and anoher 3 wires with 0.5 mm^2. I have bought another 2 (aviator connectors I think) 3 ways connectors that I used in the boot to connect the cables. From FCDIM socked I go directly to a 3 way connector (I didn’t use C248 and C237). Maybe someone will need some instructions, so I let a diagram that I made to help me understand better the path to the camera. *Some correction: - pin 4 from camera have a white wire, I draw a blue one to see better; - the microfone cable have blue and white wires, I draw a black and red ones (I thought that the wire will have these colours); - I removed 9, 10 & 11 pins from C410 and I use some mother terminals to the cables that goes to camera and a shrink tube; I will return with some images from camera. The only thing that not work are the dynamic lines, in rest I have zoom (3 levels), the guide lines (on/off) and the close button. There is another line where I think it should be the park pilot, but I don’t have it. If someone can show me what I need to update in UCDS or another tool for dynamic lines, I’ll appreciate.
  2. Hello! I want to mount a OEM reverse camera on my 2014 Fiesta. I have bought the trim piece and the harness, but I have some questions (I know that is a Focus topic, but on Fiesta topic I didn't receive answers). In the 6 pins black connector from camera I have wires from 1-6 (brown, green, yellow, white, grey and black); all these wires goes to the green one (a 7 pins connector, 6 are used), but on that one the pins are not listed and I don't know the order. Do you have any info about this green connector, the pins order or the signals based on the color of the wires? In the wiring diagram that I have I don't find the same logic of the wires. I know all the wires that I need to rewire from C410 (pins 9, 10, 11) and directly from rear display green fakra (pins 2, 3, 4), but I don't know how to connect these wires to the green connector from camera harness. Here I have another diagram of the rear harness that I made and for me, something is not logic. If I follow the wiring diagram, on black connector on camera pin 1 -> +, pin 5 -> GND, pin 2 -> LIN. That means: Camera black connector: Pin 1 (brown wire) -> C410 pin 10 (+); Pin 2 (green wire) -> C410 pin 11 (LIN); Pin 5 (grey wire) -> C410 pin 9 (GND). For the rest of the wires (I will mention C406 as traceability of the path): Pin 3 (yellow wire) -> C406 pin 1 -> C2123B pin 4 (Signal -); Pin 4 (white/blue wire) -> C406 pin 2 -> C2123B pin 2 (Signal +); Pin 6 (black wire) -> C406 pin 3 -> C2123B pin 3 (Shield). I know for sure that the black wire is connected to shield, but for the rest of the wires I'm not sure that this is the right path. Is ok my understanding from above? Maybe someone can help me with some explanations or send me some photos from their harnesses on the trunk. Below is a diagram of the real harness of camera that I have, I need answers for the yellow tabs. Thank you!
  3. Hello! I return with another diagram of the rear harness that I made, for me, something is not logical. If I follow the wiring diagram, on black connector on camera pin 1 -> +, pin 5 -> GND, pin 2 -> LIN. That means: Camera black connector: Pin 1 (brown wire) -> C410 pin 10 (+); Pin 2 (green wire) -> C410 pin 11 (LIN); Pin 5 (grey wire) -> C410 pin 9 (GND). For the rest of the wires (I will mention C406 as traceability of the path): Pin 3 (yellow wire) -> C406 pin 1 -> C2123B pin 4 (Signal -); Pin 4 (white/blue wire) -> C406 pin 2 -> C2123B pin 2 (Signal +); Pin 6 (black wire) -> C406 pin 3 -> C2123B pin 3 (Shield). I know for sure that the black wire is connected to shield, but for the rest of the wires I'm not sure that this is the right path. Is ok my understanding from above? Maybe someone can help me with some explanations or send me some photos from their harnesses on the trunk. Below is a diagram of the real harness of camera that I have, I need answers for the yellow tabs. Thank you!
  4. Hello! I want to mount a OEM reverse camera on my 2014 Fiesta. I have bought the trim piece and the harness, but I have some questions. In the 6 pins black connector from camera I have wires from 1-6 (brown, green, yellow, white, grey and black); all these wires goes to the green one (a 7 pins connector, 6 are used), but on that one the pins are not listed and I don't know the order. Do you have any info about this green connector, the pins order or the signals based on the color of the wires? In the wiring diagram that I have I don't find the same logic of the wires. I know all the wires that I need to rewire from C410 (pins 9, 10, 11) and directly from rear display green fakra (pins 2, 3, 4), but I don't know how to connect these wires to the green connector from camera harness.
  5. Hello! I want to change my standard reflector headlights with projector and DRL LED ones. As I saw on the physical connector of the headlights, the standard hl connector has 10 pins and the one with DRL led has 9 pins (pin 6 is missing). In electrical diagrams, pin 6 is used for Parking light. Do you know if the headlights are plug&play and what should be changed exactly in Forescan/IDS or another programming tool to work properly? Thank you!
×
×
  • Create New...

Forums


News


Membership