Jump to content
Do Not Sell My Personal Information


macadmy

Budding Enthusiast
  • Posts

    10
  • Joined

  • Last visited

Profile Information

  • First Name
    Matt
  • Ford Model
    Fiesta
  • Ford Year
    2014
  • UK/Ireland Location
    Essex

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

macadmy's Achievements

  1. Hi Unofix I think you hit the nail on the head with that red circle. I think the blue and white wire is to do with HS Can bus, and the brown and white has arced across it and caused all the faults and the car to stop. Would you agree, I with your help have fixed it? Many thanks Matt
  2. Hello Feeling a bit deflated now, it looks like the wire controls the A/C compressor. Surely that is never going to cause the car to breakdown, is it? If it arced could it upset the ECU? Thanks Matt
  3. I think I'm going to double check all the other local wires, put it back together and see if it starts as it is (with the broken wire) and go from there. Thanks for your help Matt
  4. Hello I have found a very damaged wire, I gave it a little pull and it broke. Its a white and brown small gauge wire close to the connector, under/in front of the battery number 28 on the connector. Any clue as to what this wire does? Can this one wire cause a total breakdown? Thanks in advance. Matt
  5. Hi And thanks for the response. Silly question, but is the PCM the black box at the bottom of the glove box with about 5 or 6 multi connectors? I have measured the resistance between pins 6 and 14 on the ODB tried wiggling wires all around engine bay ETC it remain solid at about 62ohms, Would you suggest this is of any use? Thanks Matt
  6. Hi Got my cable today from amazon hooked it up and here is the result. (WARN) [09:40:11.140] New version is available: 2.3.48. Current version: 2.3.47 (WARN) [09:40:14.345] Checking COM3... (OK) [09:40:14.694] Connection to adapter has been established: COM3 (OK) [09:40:14.694] Adapter: ELM327 v1.5 (WARN) [09:40:14.863] The adapter is NOT recommended for this car - some FORScan functions may not be available or not work properly (OK) [09:40:22.776] Connection to vehicle has been established (OK) [09:40:23.096] Vehicle: Ford Fiesta MY2013 Ecoboost Gasoline Turbocharged Direct Injection Stage VI 1.0L 2015 ( 2013.25MY ), VIN: WF0*********47896 (OK) [09:40:43.728] Found module: PCM - Powertrain Control Module (WARN) [09:40:58.909] DTCs in PCM: P0807:02-2C, P086B:1E-2C, P08AE:00-2C, P086D:00-2C, P08B0:00-2C, P086B:38-2C, P08AE:38-2C, P06A7:01-2C, P06A0:13-2C, P086A:00-2C, P0832:00-2C, P0835:00-2C, P06A1:00-2C, P2135:64-64, P2135:62-64, P1573:00-64, P0324:29-6C, P0193:17-24, P0107:16-24, P053F:21-6C (OK) [09:40:59.066] Found module: OBDII - On Board Diagnostic II (WARN) [09:40:59.323] DTCs in OBDII: P1573-P, P2135-P (OK) [09:40:59.862] Found module: APIM - Accessory Protocol Interface Module (OK) [09:41:01.202] Found module: FCDIM - Front Control/Display Interface Module (OK) [09:41:03.275] Found module: ABS - Antilock braking system (OK) [09:41:05.444] Found module: RCM - Restraint Control Module (OK) [09:41:06.863] Found module: PSCM - Power Steering Control Module (OK) [09:41:07.798] Found module: ACM - Audio Control Module (OK) [09:41:10.041] Found module: IPC - Instrument Panel Control Module (WARN) [09:41:11.377] DTCs in IPC: B10EA:00-48 (OK) [09:41:24.851] Found module: PDM - Passengers Door Control Unit (OK) [09:41:26.078] Found module: DDM - Drivers Door Module (OK) [09:41:29.511] Found module: BCMii - Body Control Module (OK) [09:41:32.265] Found module: GPSM - Global Positioning System Module Forscan said it couldn't clear DTCs, so I disconnected and reconnected the battery, Rescanned and all clear on Forscan. Then the car started fine. All pointing towards the PCM? Or a wiring gremlin? Daughter not surprisingly wont drive it now, I'm thinking my next move is a new main engine loom? How hard is that to change? Any help much appreciated. Matt
  7. Hello MY daughters car has broke down exactly 1 year ago to the day. The AA were called and this is what was pulled from the ECU Patrol found the following fault code/s:System : Engine control 1 - ZA4 / Motronic MED 17.0.1P080702 - Clutch pedal position sensor. Error Message : Signal error.P086B1E - Neutral position sensor. Error Message : Outside specified range.P08AE00 - Neutral position sensor B. Error Message : Outside specified range.P086D00 - Neutral position sensor. Error Message : Signal too high.P08B000 - Neutral position sensor B. Error Message : Signal too high.P086B - Neutral position sensor. Error Message : Malfunction.P08AE - Neutral position sensor B. Error Message : Malfunction.P06A701 - Sensor reference voltage B. Error Message : Outside specified range.P025200 - Fuel high-pressure control. Error Message : Outside specified range.P086A00 - Neutral position sensor. Error Message : Open circuit.P083200 - Clutch pedal switch A. Error Message : Signal too high.P083500 - Clutch pedal switch B. Error Message : Signal too high.P213564 - Throttle-valve/ pedal position sensor D/E. Error Message : Plausibility.P213562 - Throttle-valve/ pedal position sensor D/E. Error Message : Signal compare faulty.P157300 - Throttle valve position. Error Message : Target value not attained.P032429 - Knock control. Error Message : Signal invalid.P019317 - Fuel rail pressure sensor. Error Message : Interruption/signal too high.P061C47 - Engine control unit (rpm signal). Error Message : Monitoring not OK.P060A47 - Control unit, microprocessor. Error Message : Monitoring not OK.P060C49 - Control unit, microprocessor. Error Message : Malfunction.P010716 - Intake manifold pressure sensor. Error Message : Signal too low.P010664 - Intake manifold pressure sensor. Error Message : Plausibility.We have arranged for a recovery of your vehicle. The car was taken to local dealer that said it needed a new loom £1500.00. we collected the car thinking we could get it done cheaper else wear, But it has been fine since. That was exactly a year ago to the day But yesterday broke down again. AA came out and got it started and we got these codes. Patrol found the following fault code/s:System : Engine control 1 - ZA4 / Motronic MED 17.0.1P080702 - Clutch pedal position sensor. Error Message : Signal error.P086B1E - Neutral position sensor. Error Message : Outside specified range.P08AE00 - Neutral position sensor B. Error Message : Outside specified range.P086D00 - Neutral position sensor. Error Message : Signal too high.P08B000 - Neutral position sensor B. Error Message : Signal too high.P086B - Neutral position sensor. Error Message : Malfunction.P08AE - Neutral position sensor B. Error Message : Malfunction.P06A701 - Sensor reference voltage B. Error Message : Outside specified range.P06A013 - Variable air conditioner compressor. Error Message : Open circuit.P086A00 - Neutral position sensor. Error Message : Open circuit.P083200 - Clutch pedal switch 1. Error Message : Signal too high.P083500 - Clutch pedal switch 2. Error Message : Signal too high.P06A100 - Variable air conditioner compressor. Error Message : Short to ground.P019317 - Fuel rail pressure sensor. Error Message : Interruption/signal too high.Tap fuel rail pressure sensor, clear codes and follow. She was able to drive it home with the AA following. Today it will not start at all. I am getting P1573 and P2135 as pending faults. anyone have any clues as to what I should do? Many thanks in advance Matt
  8. Hello I've joined the forum because my daughter has a problem with her fiesta. I know it's a cheek but the car has broken down twice now. No warning just stops. Red warning service now. Here's the AA report. Doesn't look like anything there to critical to cause a breakdown. I would appreciate anyone's thoughts. Patrol found the following fault code/s:System : Engine control 1 - ZA4 / Motronic MED 17.0.1P080702 - Clutch pedal position sensor. Error Message : Signal error.P086B1E - Neutral position sensor. Error Message : Outside specified range.P08AE00 - Neutral position sensor B. Error Message : Outside specified range.P086D00 - Neutral position sensor. Error Message : Signal too high.P08B000 - Neutral position sensor B. Error Message : Signal too high.P086B - Neutral position sensor. Error Message : Malfunction.P08AE - Neutral position sensor B. Error Message : Malfunction.P06A701 - Sensor reference voltage B. Error Message : Outside specified range.P06A013 - Variable air conditioner compressor. Error Message : Open circuit.P086A00 - Neutral position sensor. Error Message : Open circuit.P083200 - Clutch pedal switch 1. Error Message : Signal too high.P083500 - Clutch pedal switch 2. Error Message : Signal too high.P06A100 - Variable air conditioner compressor. Error Message : Short to ground.P019317 - Fuel rail pressure sensor. Error Message : Interruption/signal too high.Tap fuel rail pressure sensor, clear codes and follow The service we provide is essentially an emergency breakdown assistance service and is not equivalent to the service carried out by mechanics working in a fully equipped garage or workshop. Please note in particular that we can only test for and discover so much in a breakdown situation. Make sure that you get any symptoms we have identified or possible faults we have suggested checked out by your chosen repairer before getting any further work done. Thanks Matt
  9. Welcome to Ford Owners Club - Ford Forums. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask.

×
×
  • Create New...

Forums


News


Membership