• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About beanyjon

  • Rank

Profile Information

  • Ford Model
    mondeo mk1
  1. Haha yeah, i dont think there much more i can do and its really not worth spending the money the professional will charge especially with the price of scrap soo high at the moment! I think this car is going to the scrap heap in the sky! Thanks for all your advice!
  2. Sorry about the late reply, i haven't found any1 who will do a reading cheaper than £95! today i had some time so read about the forums for inspiration, there were a few things i tried that haven't had any effect however i did notice there is a wire with a plug on the end that isn't plugged onto anything. See the images below. The white wire connects to the Cat which the last owner had replaced and is still under warranty but the where the black where connects to the white cable there is another plug, is this meant to be connected to something? Ive checked all around the area for somewhere for it to connect to and cant find any which makes me think either A) something has fallen out or B) its for a higher model and irrelevant to my model. Please help!
  3. I rang my local garage, and mobile technician. They both said it will probably show several error codes because i have changed parts but will give me scan codes for £150 which i think is a bit high seeing as they said the codes arnt exact but will only point to areas that may be in trouble so may end up changing other unnecessary parts :( The also said not to trust the ECU is ok as they have had several sent away to be looked at and have been told are fine but are not, is this a common thing? could i have been ripped off? I'm really not sure where to go from here, I've spent about £200 on parts and i know the car is fine once it is running!
  4. How do i do a code scan?
  5. I need help i have exhausted my brain on this one! I have a L reg MK1 Mondeo 1600cc petrol, A few weeks ago driving down the M6 the engine suddenly stopped, i still had lights and radio so knew it wasn't the battery and had recently filled up the tank so knew i hadn't ran out of fuel, while waiting for the RAC i tried the car and it started for about 10 seconds then cut out again. The RAC guy eventually came and said it was the ECU not delivering fuel through the injectors properly, he then towed me home. I sent the ECU away to be repaired and was charged £90 to be told it was fine, so then i started looking at other possibilities, by taking out the spark plugs i could see they were sparking but there was no fuel going into the engine but if i left the car alone fr half an hour a small amount seemed to build up to start the car for about 10 seconds then it would run dry. first i thought it could be the fuel filter clogged so i changed that, still no luck. I noticed that the battery kept draining in minutes, so today i brought a new battery, and success the car started and for about 2 minutes it was fine (longest its ran since breaking down) then it cut out again but i could start it straight away then it would die after about 10 seconds again. I pumped the accelerator to make sure the fuel was getting thought after it had sat so long i though maybe there may have been an air gap in the pipes then i left the car for a few hours, when i started it up it started up fine, become it went to idle i revd the engine and this worked fine for about 5 minutes then i let it go to idle and it stayed working, after another minute i tried reving the engine again but it cut out, now I'm back to it starting ever half hour for 10 seconds, I'm sure if i leave it a few hours i can get it to rev again for a while, but I'm out of ideas as to what the problem is and I'm spending way too much money on my guesses! any one have any ideas?